Description
Key Features and Benefits of the NCF62 Dell 4GB PERC H745
The NCF62 Dell PERC H745 RAID Controller is designed to enhance the performance and reliability of SAS and SATA storage devices. Some of its key features and benefits include:
- High Performance: The NCF62 Dell PERC H745 RAID Controller supports SAS and SATA 12Gbps interface speeds, allowing for faster data transfer rates and increased system performance.
- Data Protection: The controller provides various data protection options, such as RAID levels 0, 1, 5, 6, 10, 50, and 60. These features protect data against hardware failures and ensure data is always available.
- Cache memory: The controller has 4GB of cache memory that helps to accelerate read and write operations, making data access faster and more efficient.
- Front-mounted design: The front-mounted design of the NCF62 Dell PERC H745 RAID Controller allows for easy installation and maintenance.
- Compatibility: The controller is compatible with a wide range of Dell servers and storage devices, allowing for seamless integration with your existing infrastructure.
- Management tools: The controller comes with Dell’s OpenManage Storage Services (OMSS) and the Dell Storage Management Utility (DSMU) that helps to manage storage devices and RAID configurations.
- Scalability: The controller supports up to 255 physical drives, making it highly scalable and suitable for use in large-scale enterprise environments.
Installing and Configuring the NCF62 Dell 4GB PERC H745
To install and configure the NCF62 Dell 4GB PERC H745 Cache SAS-SATA 12G Front Raid Controller, follow these steps:
- Shut down the server and disconnect it from power.
- Install the RAID controller into an available PCIe slot on the motherboard of the server. Make sure it is securely seated in the slot.
- Connect the SAS/SATA cables from the hard drives to the ports on the RAID controller.
- Reconnect the server to power and turn it on.
- Press the appropriate key to enter the RAID controller configuration utility during the boot process. This key may vary depending on the specific RAID controller model and server, but it is typically either F2, F10, or Ctrl+R.
- Configure the RAID array by following the prompts in the configuration utility. You will need to specify the RAID level (such as RAID 0, RAID 1, or RAID 5), the hard drives to include in the array, and other settings.
- Save the configuration and exit the utility.
- Install the operating system on the newly configured RAID array.
It is important to note that the exact steps and procedures may vary depending on the specific server and RAID controller model. Consult the manufacturer’s documentation for detailed instructions.
Compatibility of the NCF62 Dell 4GB
The Dell NCF62 PERC H745 Front RAID Controller is compatible with several Dell PowerEdge servers, including:
- Dell PowerEdge R740
- Dell PowerEdge R740XD
- Dell PowerEdge R640
- Dell PowerEdge R540
- Dell PowerEdge R440
- Dell PowerEdge R340
It is also compatible with both SAS and SATA drives, as well as 12Gbps SAS drives.
The PERC H745 controller comes with 4GB cache, which can be expanded up to 8GB. It supports RAID levels 0, 1, 5, 6, 10, 50, and 60, as well as Non-RAID mode.
General Information about this Dell NCF62
- Manufacturer: Dell
- Part Number or SKU# NCF62
- Type: Raid Controller
Technical Specifications for the NCF62 Dell RAID Controller
- Interface: SAS/SATA 12Gbps
- Cache Memory: 4GB DDR4 SDRAM
- RAID Support: RAID 0, 1, 5, 6, 10, 50, 60
- Ports: 8
- Connector Type: Mini-SAS HD SFF8643
- Form Factor: Low-profile PCIe Card
- Dimensions (HxWxD): 2.5″ x 6.6″ x 0.7″ (6.4cm x 16.8cm x 1.8cm)
- Weight: 0.25 lbs
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
