Description
Operating System and Driver Support
The P10224-X21 3.2TB NVMe PCIe Read Intensive Smart Carrier (SFF) SSD is a solid-state drive that supports NVMe interface and requires a system with a PCIe slot to use it. It has a small form factor (SFF), which makes it suitable for use in compact systems.
In terms of operating system support, the P10224-X21 is compatible with most modern operating systems that support NVMe, such as Windows, Linux, and macOS. For Windows, Windows 7, Windows 8, Windows 10, and Server 2012 and later versions are supported. For Linux, most distributions that support NVMe will work, including Ubuntu, Red Hat Enterprise Linux, and SUSE Linux Enterprise Server. For macOS, version 10.12 and later are supported.
In terms of driver support, the drive uses the NVMe protocol, and therefore requires an NVMe driver to be installed on the host system. Most modern operating systems come with NVMe drivers pre-installed, so you usually don’t need to install a separate driver. However, if you encounter any issues, you can check the manufacturer’s website for the latest NVMe driver for your operating system.
Power Management and Energy Efficiency
The P10224-X21 3.2TB NVMe PCIe Read Intensive Smart Carrier (SFF) SSD is a high-performance solid-state drive (SSD) designed for read-intensive applications. It uses NVMe technology over a PCIe interface to deliver fast data transfer speeds and low latency.
In terms of power management, the P10224-X21 SSD is designed to be power-efficient. It utilizes a number of power management features to minimize energy consumption and reduce heat generation, including dynamic power management, active power management, and low-power idle modes.
In active use, the P10224-X21 SSD will consume more power than in idle mode. However, the overall energy efficiency of the drive can be optimized by using advanced power management features and by choosing the appropriate power state for the specific workload requirements.
It is important to note that actual power consumption will vary depending on the specific use case and workload, as well as the system configuration in which the drive is used. Additionally, power consumption can be influenced by factors such as the number of drives in the system, the configuration of the system, and the utilization rate of the drives.
To maximize energy efficiency, it is recommended to use the P10224-X21 SSD in systems that are optimized for NVMe technology and that utilize advanced power management features. It is also important to ensure that the system has adequate cooling and ventilation to prevent overheating.
Troubleshooting and Maintenance
The P10224-X21 3.2TB NVMe PCIe Read Intensive Smart Carrier (SFF) SSD is a high-performance storage device that requires proper maintenance and troubleshooting to ensure optimal performance and reliability. Here’s a more detailed explanation of the troubleshooting and maintenance tips:
- Firmware update: The firmware is the low-level software that runs on the SSD and provides essential functionality such as data management, error correction, and performance optimization. Updating the firmware can resolve known bugs and compatibility issues, as well as improve the performance of the SSD. To update the firmware, you need to download the latest firmware version from the manufacturer’s website, and follow the instructions to install it on the SSD.
- Compatibility: Before installing the P10224-X21 SSD, it’s important to make sure that your system is compatible with it. The SSD requires a system with a PCIe slot and supports NVMe interface. You should also check the compatibility of the SSD with your operating system, as some older versions of Windows or Linux may not support NVMe.
- Driver update: The NVMe driver is the software that allows the operating system to communicate with the SSD and manage its performance. Keeping the NVMe driver up-to-date is important for optimal performance and compatibility. You can update the NVMe driver by downloading the latest version from the manufacturer’s website and following the instructions to install it on your system.
- System optimization: To ensure optimal performance of the SSD, it’s important to keep your system optimized. This includes keeping your operating system and drivers up-to-date, avoiding overloading your system with too many applications or processes running at the same time, and keeping your system free of malware.
- Monitoring and diagnostics: Regular monitoring and diagnostics can help you detect any potential issues with the SSD and take preventive measures before they become serious problems. You can use monitoring tools such as the Windows Task Manager or Resource Monitor to monitor the performance and usage of the SSD, and diagnostic tools provided by the manufacturer to check the health of the drive.
- Regular backups: Data loss can occur due to a variety of reasons, such as hardware failure, malware, or accidental deletion. Regular backups can help you protect your data and restore it in case of any issues with the SSD or your system. You can use a variety of backup solutions such as external hard drives, cloud storage, or other backup options to keep your data safe.
- Cleaning: Dust and debris can accumulate inside the system over time, which can block the airflow and cause the system to overheat. Overheating can cause damage to the SSD, so it’s important to keep the system and the SSD clean and free of dust and debris. You can use a can of compressed air or a soft brush to clean the system, and follow the manufacturer’s instructions for cleaning the SSD.
By following these troubleshooting and maintenance tips, you can help ensure optimal performance and reliability for your P10224-X21 3.2TB NVMe PCIe Read Intensive Smart Carrier (SFF) SSD. If you encounter any issues or have any questions, contact the manufacturer for support.
Main Information of HPE P10224-X21 3.2TB
- Manufacturer :HPE
- Model Number or SKU# P10224-X21
- Device Type: Solid State Drive – Hot-Swap
- Capacity: 3.2 TB
- Form Factor: 2.5 inch SFF
- Interface: PCI Express 3.0 x4 (NVMe)
- Plug Type: Hot Pluggable
- Carrier Type: Smart Carrier NVMe (SCN)
- Workload Type: Mixed Use
- NAND Flash Memory Type: Triple-Level Cell (TLC)
- Connectivity: Dual Port
- Bundled with: HPE Smart Carrier NVMe (SCN)
- Features: Digitally Signed Firmware (DS)
- Platform Supported: HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy
- Height: 15.00 mm (0.60 inch)
Performance of SFF SSD
- Lifetime Writes: 29200
- Endurance DWPD (Drive Writes Per Day): 5
- MAX Seq Reads Throughput (MiB/s): 3400
- Max Seq Writes Throughput (MiB/s): 2900
- Random Read Avg. Latency uSec (4KiB,Q1): 86
- Random Write Avg. Latency uSec (4KiB,Q1): 26
- Random Read IOPS (4KiB, Q=16): 165000
- Random Write IOPS (4KiB, Q=16): 145000
- Max Random Read IOPS (4KiB): 780000@Q256
- Max Random Write IOPS (4KiB): 195000@Q64
Expansion And Connectivity of HPE NVME 3.2TB
- Interfaces: 1 x PCI Express 3.0 x4 (NVMe)
- Compatible Bay: 2.5″ SFF
Compatibility of HPE Mixed Use SSD
- HPE Nimble Storage dHCI Large Solution with HPE ProLiant DL380 Gen10 (2.5inch), Medium Solution with HPE ProLiant DL360 Gen10 (2.5inch), Small Solution with HPE ProLiant DL360 Gen10 (2.5inch)
- HPE ProLiant DL Series: DL325 Gen10 (2.5inch), DL325 Gen10 Base (2.5inch), DL325 Gen10 Entry (2.5inch), DL325 Gen10 Performance (2.5inch), DL325 Gen10 SMB Solution (2.5inch), DL325 Gen10 Solution (2.5inch), DL360 Gen10 All Flash Server for Datera (2.5inch), DL360 Gen10 All Flash Server for Weka (2.5inch), DL360 Gen10 Compute Server for Cohesity DataPlatform (2.5inch), DL360 Gen10 Low (2.5inch), DL360 Gen10 Network Choice (2.5inch), DL360 Gen10 Performance for Cohesity DataPlatform (2.5inch), DL360 Gen10 SMB (2.5inch), DL360 Gen10 SMB Network Choice (2.5inch), DL360 Gen10 Solution (2.5inch), DL360 Gen9 High Performance (2.5inch), DL380 Gen10 All Flash Server for Datera (2.5inch), DL380 Gen10 Entry SMB (2.5inch), DL380 Gen10 for Cohesity DataPlatform (2.5inch), DL380 Gen10 for SAP HANA Compute Block (2.5inch), DL380 Gen10 Hybrid Server for Datera (2.5inch), DL380 Gen10 Network Choice (2.5inch), DL380 Gen10 Network Choice for CTERA (2.5inch), DL380 Gen10 Network Choice for SAP HANA Compute Block (2.5inch), DL380 Gen10 NVMe All Flash Server for Datera (2.5inch), DL380 Gen10 Server for CTERA (2.5inch), DL380 Gen10 SMB (2.5inch), DL380 Gen10 SMB Networking Choice (2.5inch), DL380 Gen10 Solution (2.5inch)
- HPE Synergy 480 Gen10 Compute Module (2.5inch), 480 Gen10 Premium Backplane Compute Module (2.5inch), 480 Gen10 w/o Drives Compute Module (2.5inch), 660 Gen10 Compute Module (2.5inch), 660 Gen10 Premium Compute Module (2.5inch), 680 Gen9 4S-EX Compute Module (2.5inch)
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.