Description
More Info of Switching PSU
The PWR-C1-1100WAC is a Cisco power supply unit designed to provide 1100 watts of power to Cisco networking equipment. It is an AC power supply, meaning that it converts alternating current (AC) electricity from the wall outlet into direct current (DC) power, which is used by the networking equipment. This power supply is designed to be used with Cisco routers and switches that require 1100 watts of power or less. It has a compact size and is designed to be easily installed in a Cisco networking rack. This PSU is an important component of a Cisco networking system, as it provides the power necessary for the equipment to operate.
Troubleshooting and Maintenance
Troubleshooting:
- Verify if the power supply is properly installed and connected to the electrical outlet and the switch.
- Check the LED status on the power supply, green LED indicates normal operation and red LED indicates a fault.
- Check the switch’s event log for power supply related events.
- If the power supply is faulty, replace it with a new one.
Maintenance:
- Ensure that the power supply is installed in a clean and dry environment, free from dust and moisture.
- Regularly check the air vents for dust build-up and clean as needed.
- Inspect the power cord for any damages, replace if needed.
- Replace the power supply if it reaches its end-of-life or is showing signs of failure.
Compatibility
This is Cisco 1100 watt AC power supply is compatible with certain Cisco networking equipment that requires a 1100 watt AC power supply. It is important to note that the compatibility of a power supply with a particular piece of equipment is typically determined by factors such as the voltage, current, and power requirements of the equipment, as well as the physical dimensions and connector types of the power supply.
To determine if the 1100 W AC power supply is compatible with a specific piece of Cisco networking equipment, you will need to consult the documentation for that equipment. This documentation should include information on the power requirements and any specific compatibility requirements for the power supply. You may also need to refer to the documentation for the power supply itself to determine if it meets the requirements of the networking equipment. It is always important to use a power supply that is compatible with the equipment to ensure safe and reliable operation
General Information about this Cisco AC PSU
- Manufacturer: Cisco
- Model Number or SKU# PWR-C1-1100WAC=
- Product Type: Power Supply
Technical Information of 1100 Watt Power Module
- Receptacles IEC 60320 C16
- Module Type: Switching PSU
Power Description for Switching PSU
- Input Voltage 110 V AC
- Input Voltage 220 V AC
- Input Voltage Range 110 V AC to 240 V AC
- Output Voltage -56 V DC
- Frequency 50 Hz
- Frequency 60 Hz
- Output Power 1.10 kW
- Current 19.64 A
- Current 13 A
- 7613
Performance of AC Power Supply
- Connectors: Main Connector
- Form Factor: External
- Input Current: 12 A
- Input Frequency: 50-60 Hz
Dimensions & Weight
- Height: 1.6 Inch
- Width: 3.3 Inch
- Depth: 13.7 Inch
- Weight (Approximate): 3 Lbs
Miscellaneous
- Cisco Catalyst 3850 Series Switches
Certifications & Standards
- FCC Part 15
- ICES-003
- EN 55022
- CISPR 22
- AS/NZS 3548
- BSMI
- VCCI
- EN 55024
- EN300386
- EN 50082-1
- EN 61000-3-2
- EN 61000-3-3
- EN61000-4-2
- EN61000-4-3
