Description
Redundancy and Failover Capabilities
- Redundant Power Supply: The PWR-C45-9000ACV Cisco 9000 Watt AC Power Supply supports redundant power supply, providing a secondary power supply that can take over in case of failure of the primary power supply.
- Power Supply Unit (PSU) Failover: In case of failure of one PSU, the other PSU automatically takes over, ensuring continuous power supply to the system.
- Hot-Swappable PSUs: The PSUs of the PWR-C45-9000ACV Cisco 9000 Watt AC Power Supply can be replaced without shutting down the system, allowing for minimal downtime during maintenance.
- Power Supply Monitoring: The PWR-C45-9000ACV Cisco 9000 Watt AC Power Supply supports power supply monitoring, allowing for real-time monitoring of power supply status and early detection of potential failures.
- Automatic Power Supply Redistribution: In case of failure of one PSU, the power is automatically redistributed to the remaining PSUs, ensuring that the system remains powered on.
- Load Sharing: The PSUs of the PWR-C45-9000ACV Cisco 9000 Watt AC Power Supply are designed to share the load evenly, ensuring that no single PSU is overworked and reducing the likelihood of failure.
- Power Supply Fault Detection: The PWR-C45-9000ACV Cisco 9000 Watt AC Power Supply supports power supply fault detection, allowing for early detection and resolution of power supply issues.
- Power Supply Restart: In case of power failure, the PWR-C45-9000ACV Cisco 9000 Watt AC Power Supply automatically restarts, ensuring that the system is powered on and ready for use.
- Remote Power Management: The PWR-C45-9000ACV Cisco 9000 Watt AC Power Supply supports remote power management, allowing for remote monitoring and control of power supply status and settings.
- Energy Efficient Mode: The PWR-C45-9000ACV Cisco 9000 Watt AC Power Supply supports energy efficient mode, allowing for power savings and reducing energy costs.
Cooling and Thermal Management
- Cooling Fans: The PWR-C45-9000ACV Cisco 9000 Watt AC Power Supply is equipped with cooling fans that help to dissipate heat generated by the power supply and keep it within safe operating temperatures.
- Thermal Sensors: The power supply is also equipped with thermal sensors that monitor the internal temperature and trigger the cooling fans to turn on when necessary.
- Air Flow: The power supply is designed with an optimized air flow path to ensure efficient cooling and thermal management.
- Power Supply Temperature Monitoring: The power supply also has a built-in temperature monitoring system, which can be accessed through the Cisco IOS command line interface (CLI) to check the temperature of the power supply.
- Power Supply Temperature Alarm: The power supply also has a built-in temperature alarm system, which can be configured to trigger an alarm or shut down the power supply in case of high temperature.
- Hot-Swappable Power Supply: The power supply is hot-swappable, meaning that it can be replaced without having to power off the device or network.
- Power Supply Redundancy: The power supply supports power supply redundancy, which provides an additional level of protection against power supply failure.
- Power Supply Load Balancing: The power supply also supports power supply load balancing, which distributes the load evenly among all the power supplies to ensure optimal performance and thermal management.
Input Voltage and Power Connections
The PWR-C45-9000ACV Cisco 9000 Watt AC Power Supply is designed to operate with an input voltage range of 200-240VAC and a frequency of 50/60Hz.
The power supply has a total of four power connections, two for input and two for output. The input connections are made through two IEC-320-C20 connectors, and the output connections are made through two IEC-320-C14 connectors. The input connections are used to connect the power supply to an AC power source, and the output connections are used to connect the power supply to the device it is powering.
It is important to note that the PWR-C45-9000ACV is designed to be used with specific Cisco devices and is not compatible with all Cisco devices. It is recommended to check the compatibility of the device you want to use it with before purchasing the power supply.
General Information
- Manufacturer Cisco Systems, Inc
- Manufacturer Part Number PWR-C45-9000ACV
- Brand Name Cisco
- Product Name 9000 W AC-Input Power Supply
- Product Type Power Module
- Output Power 9 kW
Compatibility
- Cisco Catalyst Catalyst Switches:
- 4510R-E
- 4507R+E
