Description
Features and Benefits of QLE2690-SR-CK QLogic 16GB FC HBA
The QLE2690-SR-CK QLogic 16GB Single Port PCI Express 3.0 X8 Fibre Channel Host Bus Adapter offers the following features and benefits:
- High-speed connectivity: The adapter provides 16Gb/s Fibre Channel connectivity to enable high-speed data transfer between servers, storage devices, and networks.
- Low latency: The QLE2690-SR-CK has a low latency design, reducing delays and ensuring fast data transfer rates.
- Single-port design: The adapter has a single port, which makes it easy to install and manage.
- PCI Express 3.0 x8 interface: The adapter uses the PCI Express 3.0 x8 interface, providing high bandwidth and low latency for optimal performance.
- Fibre Channel Protocol: The adapter supports Fibre Channel Protocol (FCP), which enables fast and reliable data transfer between servers and storage devices.
- Easy deployment: The QLE2690-SR-CK is easy to deploy and manage, with driver support for multiple operating systems.
- Energy efficient: The adapter is designed to be energy efficient, helping to reduce power consumption and costs.
- High reliability: The QLE2690-SR-CK is built with high reliability in mind, featuring a robust design and advanced error detection and correction mechanisms.
- Scalability: The adapter is highly scalable, allowing you to easily expand your Fibre Channel infrastructure as your needs grow.
Installation and Configuration of QLE2690-SR-CK QLogic 16GB
Here are the general steps for installing and configuring the QLE2690-SR-CK QLogic 16GB Single Port PCI Express 3.0 X8 Fibre Channel Host Bus Adapter:
- Turn off your computer and unplug it from the power source.
- Install the QLE2690-SR-CK into an available PCIe slot on your computer.
- Reconnect the power source and turn on your computer.
- Install the latest drivers for the QLE2690-SR-CK from the QLogic website or the driver installation CD that came with the adapter.
- Configure the adapter settings as necessary using the QLogic configuration utility or the operating system’s built-in device manager.
- Connect the Fibre Channel cable to the adapter’s SFP+ port and the other end to the appropriate Fibre Channel switch or storage device.
- Verify that the adapter is detected by the operating system and that the Fibre Channel connection is working properly.
It is recommended to consult the QLE2690-SR-CK’s documentation for detailed installation and configuration instructions, as well as any specific considerations or requirements for your particular setup. Additionally, it may be helpful to consult with a qualified technician or IT professional if you are unsure about any aspect of the installation or configuration process.
Compatibility with Different Operating Systems
The QLE2690-SR-CK QLogic 16GB Single Port PCI Express 3.0 X8 Fibre Channel Host Bus Adapter is compatible with the following operating systems:
- Microsoft Windows Server 2019, 2016, 2012 R2, 2012, and 2008 R2 (64-bit versions)
- Red Hat Enterprise Linux 6.7, 6.8, 6.9, 7.2, 7.3, 7.4, 7.5, and 7.6 (64-bit versions)
- SUSE Linux Enterprise Server 11 SP3, 11 SP4, 12, 12 SP1, 12 SP2, and 15 (64-bit versions)
- VMware ESXi 5.5, 6.0, 6.5, and 6.7
General Information about this QLogic QLE2690-SR-CK
- Brand: QLogic
- MPN : QLE2690-SR-CK
- Type: Controller
- Sub-Type: Fibre Channel
Technical Information
- Device Type : Host Bus Adapter
- Form Factor : Plug-In Card
- Interface (Bus) Type : PCI Express 3.0 X8
- PCI Specification Revision : PCIE 3.1
- Ports : 16GB Fibre Channel X 1
- Connectivity Technology : Wired
- Data Link Protocol : 16GB Fibre Channel
- Fibre Channel : Fc-Gs-2, Fc-Gs-3, Fc-Tape, Fcp-2, Fc-Pi-5, Scsi-Fcp
- Data Transfer Rate : 16 GBps
- Max Transfer Distance : 1312 Ft
- Capacity : Concurrent Logins: 2048 Active Exchanges: 2048
- Remote Management Protocol : Smi-S, Cli
- Features : Quality Of Service (Qos), Uefi Support, Bios Support, Transparent (N_Port Id Virtualization – Npiv) Mode Support, Extended Message-Signaled Interrupts (Msi-X)
_dqso-bv-324x324.jpg)
