Description
Installation and Configuration of QLE2740-SR-CK HBA
Here are the general steps for installing and configuring the QLE2740-SR-CK Qlogic 32GB Single Port PCIE Gen3X8 Sr Lc Multi-mode Optic Fibre Channel Host Bus Adapter:
Installation:
- Turn off the server where you want to install the HBA.
- Open the server case and locate an available PCIe slot.
- Remove the cover from the slot, if necessary.
- Align the HBA with the slot and firmly press it into place.
- Secure the HBA to the chassis using the screws provided.
- Close the server case.
Configuration:
- Power on the server and wait for it to boot up.
- Install any necessary drivers for the HBA on the server, which should be provided by the manufacturer.
- Connect the multi-mode optic fibre cable to the LC connector on the HBA and the corresponding port on your SAN switch.
- Configure the HBA’s settings according to your network requirements, such as the Fibre Channel topology, node name, and World Wide Name (WWN).
- Test the connection by running diagnostic tests or verifying connectivity with your SAN.
Performance and Reliability of QLE2740-SR-CK HBA
The QLE2740-SR-CK is a high-performance Fibre Channel Host Bus Adapter (HBA) manufactured by QLogic. Here are some more details about its performance and reliability:
Performance:
The QLE2740-SR-CK supports a data transfer rate of up to 32 Gbps, which makes it one of the fastest HBAs available. It uses PCI Express Gen3 x8 interface, which provides high bandwidth and low latency for data transfers. The HBA also supports multi-core processors, which helps to increase the number of I/O operations per second (IOPS) that can be handled.
Reliability:
The QLE2740-SR-CK is designed to provide high reliability in mission-critical environments. It uses advanced error detection and correction techniques to ensure data integrity, and supports a range of high-availability features, including failover and load balancing. The HBA also includes a range of diagnostic and monitoring tools, which can help to identify and troubleshoot any issues that arise.
In addition, the QLE2740-SR-CK uses a Small Form-factor Pluggable (SFP+) optical transceiver to provide connectivity over multi-mode fiber. This makes it suitable for use in environments where long distance connections are required. The HBA is compatible with a wide range of operating systems and virtualization platforms, making it a versatile and reliable solution for enterprise-level server environments.
Network Topologies and Fibre Channel Standards Supported
The QLE2740-SR-CK is a Fibre Channel Host Bus Adapter (HBA) manufactured by QLogic. Here are the network topologies and Fibre Channel standards supported by this HBA:
Network Topologies:
- Point-to-Point (P2P)
- Arbitrated Loop (AL)
- Switched Fabric (SW)
Fibre Channel Standards Supported:
- Fibre Channel Protocol (FCP)
- Fibre Channel-SCSI Protocol (FCP-SCSI)
- Fibre Channel Tape Protocol (FCP-TAPE)
- Fibre Channel over Ethernet (FCoE)
- Fibre Channel over IP (FCIP)
- Enhanced Small Form-factor Pluggable (SFP+)
The QLE2740-SR-CK supports the PCI Express Gen3 x8 interface, which provides a high-speed data transfer rate of 32 Gbps. It also supports multi-mode optical fiber connectivity with LC connectors, allowing for communication over distances of up to 100 meters.
The HBA is designed for use in enterprise-level server environments, and is compatible with a variety of operating systems and virtualization platforms. Its high data transfer rate and low latency make it suitable for storage area network (SAN) applications that require high performance and reliability.
General Information
- Manufacturer: Qlogic
- MPN: QLE2740-SR-CK
- Type: Controller
- Sub-Type: Fiber Channel
Technical Information
- Total Number of Fibre Channel Ports: 1
- Data Transfer Rate: 32 Gbit/s
- Fiber Mode Supported: Multi-mode
- Host Interface: PCI Express 3.0 x8
Physical Characteristics
- Form Factor: Plug-in Card
- Card Height: Low-profile
Miscellaneous
- Environmentally Friendly: Yes
- Environmental Certification: WEEE
Dimension and Weight
- 10.5 x 7.25 x 1.34 Inches
