Description
Introduction to Samsung M393A1K43BB0-CRC
Samsung M393A1K43BB0-CRC is an 8GB DDR4 ECC Registered memory module designed for use in server systems. It features a clock speed of 2400MHz and a CAS latency of 17, which makes it suitable for use in high-performance computing applications such as data centers, cloud computing, and other enterprise-level applications.
This memory module is designed to operate at a voltage of 1.2V, which helps to reduce power consumption and heat generation, making it an energy-efficient solution for server applications. It is built with a 288-pin DIMM form factor, which is the standard size for DDR4 memory modules and is compatible with most server motherboards that support DDR4 memory.
The ECC (Error Correction Code) feature on this memory module ensures data integrity by detecting and correcting errors that may occur during data transmission. This is an important feature for server applications where data integrity is critical and any error can result in a system failure or data corruption.
The Samsung M393A1K43BB0-CRC memory module is also designed with 1Rx8 (Single Rank) configuration, which means it has one bank of memory chips that are accessed in a sequential order. This helps to improve memory access times and overall system performance.
Specifications of Samsung M393A1K43BB0
Sure, here are some more details on the specifications of the Samsung M393A1K43BB0-CRC Memory Module:
- Memory Type: DDR4 SDRAM
- Memory Capacity: 8GB
- Form Factor: 288-pin DIMM
- Rank: 1Rx8 (Single Rank)
- Speed: 2400MHz (PC4-19200)
- Latency: CL17
- Voltage: 1.2V
- Error Correction Code (ECC): Yes
- Registered: Yes
The 8GB capacity of this memory module makes it suitable for use in a wide range of server applications, from small business servers to large data centers. The 288-pin DIMM form factor is the standard size for DDR4 memory modules and is compatible with most server motherboards that support DDR4 memory.
The 2400MHz clock speed (PC4-19200) and CL17 latency of this memory module ensure high-speed performance and low latency access times, which is important for applications that require fast and responsive memory access.
The ECC and registered features of this memory module are also critical for server applications that require high data integrity and reliability. The ECC feature detects and corrects errors in real-time, while the registered feature helps to reduce signal noise and improve system stability.
Finally, the low voltage of 1.2V helps to reduce power consumption and heat generation, making this memory module an energy-efficient solution for server applications. Overall, the Samsung M393A1K43BB0-CRC Memory Module offers a reliable and high-performance memory solution for server systems.
Compatibility and Installation
The Samsung M393A1K43BB0-CRC Memory Module is compatible with a wide range of server systems that support DDR4 memory. However, it is important to ensure that your server motherboard is compatible with the registered and ECC features of this memory module before purchasing.
To install the Samsung M393A1K43BB0-CRC Memory Module, follow these steps:
- Power off the server system and disconnect all cables.
- Locate the memory slots on the server motherboard. The memory slots are usually located near the CPU socket.
- Open the latches on the memory slots by pushing them down.
- Align the notches on the memory module with the notches on the memory slot and gently press the module into the slot.
- Push down on the latches on each end of the memory slot until they snap into place and secure the memory module.
Once the memory module is securely installed, power on the server system and check the system BIOS to confirm that the memory has been detected and is operating at the correct speed and capacity.
It is important to note that some server systems require memory modules to be installed in specific slots or configurations for optimal performance. Be sure to consult your server system documentation or manufacturer’s website for guidance on the correct memory configuration for your system.
General Information
- Manufacturer: Samsung
- Model Number or SKU# M393A1K43BB0-CRC
- Product Name: 8gb Ddr4 Sdram Memory Module
Technical Information
- Storage Capacity: 8gb
- Memory Technology: Ddr4 Sdram
- Number Of Modules: 1 X 8gb
- Bus Speed: 2133mhz Ddr4-2400/Pc4-19200
- Data Integrity Check: Ecc
- Signal Processing: Registered
- Cas Latency Timings: Cl17
- Features: 1rx8
- Form Factor: 288-Pin Dimm
Physical Characteristics
- Dimensions (W X D X H) : 8.89 X 19.81 X 1.91 Cm (3.5 X 7.8 X 0.75 In)
- Weight: 0.45 Kg (1 Lb)
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.





