Samsung M393A2K43DB2-CTD8Q 16GB 2666mhz Pc4-21300 Cl19 Ecc Registered Dual Rank X8 1.2v Ddr4 Sdram 288-pin for Server | New Bulk Pack

Samsung M393A2K43DB2-CTD8Q is a DDR4 SDRAM (Double Data Rate 4 Synchronous Dynamic Random Access Memory) module that is specifically designed for server use. It is manufactured by Samsung, which is one of the world’s leading memory manufacturers.

This memory module has a capacity of 16GB and operates at a speed of 2666MHz. It is also known as PC4-21300, which is the industry standard for DDR4 memory with a transfer rate of 2133 MT/s.

The M393A2K43DB2-CTD8Q memory module has a CAS latency of 19, which means it takes 19 clock cycles for the memory module to respond to a command from the memory controller. It is also ECC registered, which stands for Error-Correcting Code Registered. ECC is a feature that helps to detect and correct errors in data that is being read or written to the memory.

The memory module is dual-rank, which means that it has two sets of memory chips on each side of the module. Each rank operates independently and provides faster access to the memory. It is also X8 rated, which means it has 8 memory chips per rank.

The voltage of this memory module is 1.2V, which is the standard voltage for DDR4 memory. This makes it more power-efficient than DDR3 memory, which has a standard voltage of 1.5V.

Installation Guide for Samsung M393A2K43DB2-CTD8Q

The following is a general guide to installing Samsung M393A2K43DB2-CTD8Q DDR4 SDRAM memory module in a server. Please note that the installation process may vary depending on the server model and manufacturer, so always refer to your server manual before installing or upgrading memory.

• Power off the server and disconnect all cables.
• Locate the memory slots on the server motherboard. Refer to the server manual for the location and number of memory slots.
• Push the retaining clips on both sides of the memory slot to release any existing memory modules.
• Align the notches on the Samsung M393A2K43DB2-CTD8Q DDR4 SDRAM module with the notches on the memory slot.
• Gently push the module into the slot until the retaining clips click into place.
• Repeat steps 3-5 for any additional memory modules you wish to install.
• Reconnect all cables and power on the server.
• Check the server manual or the BIOS settings to verify that the memory has been recognized and is operating at the correct speed and capacity.

It is important to handle the memory module with care and avoid touching the gold contacts on the module. This can cause damage to the module and reduce its performance.

Additionally, it is recommended to install memory modules in pairs or multiples of the same capacity and speed to ensure maximum performance and compatibility. Check your server manual for recommended memory configurations.

If you encounter any issues during installation, refer to your server manual or contact your server manufacturer for assistance.

Performance and Compatibility of Samsung M393A2K43DB2-CTD8Q

The Samsung M393A2K43DB2-CTD8Q DDR4 SDRAM is a high-performance memory module that is designed to provide reliable and efficient memory performance for servers. The following are some of the key performance and compatibility features of this memory module:

• Speed: The M393A2K43DB2-CTD8Q DDR4 SDRAM operates at a speed of 2666MHz, which is the industry standard for DDR4 memory with a transfer rate of 2133 MT/s. This high speed ensures that the memory can keep up with the demands of server applications and provide fast and efficient data access.
• Capacity: The M393A2K43DB2-CTD8Q DDR4 SDRAM has a capacity of 16GB, which is a sufficient amount of memory for most server applications. It allows for multiple applications to run simultaneously and reduces the risk of memory-related bottlenecks.
• ECC Registered: The M393A2K43DB2-CTD8Q DDR4 SDRAM is ECC registered, which means it has an additional layer of error detection and correction. This feature is essential for server applications where data integrity is critical, as it helps to prevent data corruption and system crashes.
• Dual-Rank: The M393A2K43DB2-CTD8Q DDR4 SDRAM is a dual-rank memory module, which means that it has two sets of memory chips on each side of the module. Each rank operates independently and provides faster access to the memory. This feature improves the memory performance and reduces latency.
• Compatibility: The M393A2K43DB2-CTD8Q DDR4 SDRAM is compatible with most server models that support DDR4 memory. It is important to ensure that your server is compatible with the memory before purchasing it. Check your server manual or contact the server manufacturer for compatibility information.
• Energy-Efficient: The M393A2K43DB2-CTD8Q DDR4 SDRAM operates at a voltage of 1.2V, which is lower than the standard voltage for DDR3 memory (1.5V). This makes it more energy-efficient and reduces power consumption in the server.