Description
More Information
The Synology SAT5200-480G 480GB SATA 6GBPS Internal Solid SSD is a type of solid-state drive (SSD) designed for use in a Synology NAS (network-attached storage) device.
“SATA 6GBPS” refers to the type of interface used to connect the drive to the NAS. SATA (Serial ATA) is a standard interface for connecting storage devices to a computer. SATA 6GBPS (also known as SATA III) refers to the third generation of the SATA standard and supports a data transfer rate of up to 6 Gbps (gigabits per second).
The SSD is an internal drive, which means it is designed to be installed inside the NAS. It is a 2.5-inch drive, which means it is designed to be used in a drive bay that is capable of accepting a 2.5-inch drive.
Performance and Reliability
The SAT5200-480G SSD is designed for use in a Synology NAS device, so it should be compatible with most Synology NAS devices that have a SATA 6GBPS (also known as SATA III) interface and support 2.5-inch drives.
To determine whether the SSD is compatible with a specific Synology NAS device, you will need to check the device’s documentation or consult with a Synology technical support representative.
In terms of specific performance numbers, the SSD is rated for sequential read speeds of up to 540 MB/s and sequential write speeds of up to 500 MB/s. These numbers refer to the speed at which the drive can read or write large files sequentially (i.e., in a continuous stream).
Random read and write performance will typically be lower than sequential performance and can vary depending on the specific workload being run. It’s also worth noting that the actual performance of the SSD may vary from these rated numbers depending on the specific NAS device it is installed in and the workload being run on the drive.
From Factor
The form factor of a storage device refers to its physical size and shape, as well as the type of interface used to connect it to a computer or other device.
The Synology SSD 480GB SATA 6GBPS Internal Solid SSD is a 2.5-inch drive, which means it is designed to be used in a drive bay that is capable of accepting a 2.5-inch drive. 2.5-inch drives are smaller and thinner than 3.5-inch drives, which makes them well-suited for use in devices with limited space or where a smaller form factor is desired.
The SAT5200-480G SSD uses the SATA (Serial ATA) interface to connect to the NAS device. SATA is a standard interface for connecting storage devices to a computer and is commonly used in desktop and laptop computers, as well as in servers and other devices. The SSD uses SATA 6GBPS (also known as SATA III), which refers to the third generation of the SATA standard and supports a data transfer rate of up to 6 Gbps (gigabits per second).
General Information about this Synology SAT5200-480G
- Manufacturer: Synology
- Model Number or SKU# SAT5200-480G
- Product Type: Solid State Drive
- Storage Capacity: 480GB
Technical Information for 480GB Solid State Drive
- Form Factor: 2.5inch
- Interface Type: SATA-6GBPS
- MTBF: 1,500,000 Hours
Dimensions & Weight of 2.5Inch SSD
- Height: 0. 3 inch
- Width: 2.7 inch
- Depth: 3.9 inch
- Weight: 1.50 lbs
Features
- End-to-end Data Protection, Power Loss Protection (PLP)
Performance
- Drive Writes Per Day (DWPD): 1.3
- SSD Endurance: 1145 TB
- Drive Transfer Rate: 600 MBPS (External)
- Internal Data Rate: 500 MBPS (Read) / 530 MBPS (Write)
- Maximum 4kb Random Write: 55000 IOPS
- Maximum 4kb Random Read: 95000 IOPS.
Power Consumption
- Supply Voltage: 5V (± 5%)
- Active Read (Typ.): 2.6 W
- Active Write (Typ.): 4.2 W
- Idle: 1.4 W
Temperature
- Operating Temperature: 0°C to 70°C (32°F to 158°F)
- Storage Temperature: -40°C to 85°C (-40°F to 185°F)
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
