Seagate ST3750640A 750GB Hard Disk Drive
If you need a large quantity of ST3750640A product - call us at +1 (718) 766 5269 or request a quote at live chat and our sales manager will contact you shortly.
2 of 3

Why ST3750640A Seagate 750GB 7.2K RPM 16MB Buffer is the best?

Availability: In Stock
Part Number#: ST3750640A
$223.00
3% Discount on Checkout

Short Description:
ST3750640A Barracuda 750GB (Gigabyte) 7200 RPM 16MB (Megabyte) Buffer 3.5Inches Form Factor Advanced Technology Attachment (ATA) Integrated Drive Electronics (IDE) Hard Disk Drive | Made by Seagate | Brand New 3 Years Warranty

Interface Types of This Product: ATA-IDE 750GB-7.2K RPM

Brand:
Seagate
Brand Warranty:
3 Years from the Manufacturer
Product Condition:
New Factory Sealed
Warranty provided by ALLHDD.COM:
90 Days
We are giving specifications below, why one should consider procuring Seagate 750GB-7.2K RPM ATA-IDE Hard Drive features, a general overview, description, performance specification, relevant images, a competitive price infographic, and technical information about the ST3750640A model with compatibility.

High-speed data transfer

The cache of the ST3750640A Seagate 750GB 7.2K RPM 16MB Hard Drive is 16MB, which is used to temporarily store frequently accessed data, allowing for faster data retrieval. A larger cache size can result in improved performance, especially when dealing with random I/O operations. The cache stores the data that the drive anticipates will be requested next, this will allow the drive to access the data faster.

The spindle speed of the ST3750640A Seagate 750GB 7.2K RPM 16MB Hard Drive is 7200 RPM (revolutions per minute), which is a measure of how fast the disk platters inside the drive rotate. A higher RPM generally results in faster data access and better overall performance. The faster the disk platters rotate, the faster the drive can access the data stored on it. 7200 RPM is a common spindle speed for consumer-grade hard drives and is considered a good balance between performance and power consumption.

It's important to note that the spindle speed and cache size may vary depending on the specific model and vendor. It's always a good idea to check the manufacturer's website or the product documentation for the most up-to-date and accurate information.

Form Factor and Mounting

The ST3750640A Seagate 750GB 7.2K RPM 16MB Hard Drive has a 3.5-inch form factor, which is a standard size for internal hard disk drives and is commonly used in servers and desktop computers. The 3.5-inch form factor allows for easy installation and removal, and ensures proper alignment and connection with the drive.

The drive comes with a tray for mounting, which is a device that holds the drive securely in place and allows for easy installation and removal. This tray is designed to fit into a standard 3.5-inch drive bay and ensures proper alignment and connection with the drive. The tray also have a locking mechanism that keeps the drive securely in place and prevent vibration. This makes it easy to install and remove the drive, and keeps it securely in place during operation.

It's important to check the form factor of the drive and make sure that it is compatible with the drive bay of the server or storage system before purchasing. It's also important to check the compatibility of the tray with the server or storage system, some systems might have specific trays or caddies to mount the hard drives.

Please note that the drive may come with a tray or without one, it depends on the specific model and the vendor. You should check the package content for the tray before purchasing.

Hot-swap capability

The ST3750640A Seagate 750GB 7.2K RPM 16MB Hard Drive is compatible with systems that support the PATA (Parallel ATA) interface. It's also compatible with PATA host bus adapters (HBAs) and PATA controllers. This drive is also backward compatible with the previous ATA standards like ATA-66 and ATA-33.

The dimensions of the ST3750640A Seagate 750GB 7.2K RPM 16MB Hard Drive are as follows:

  • Width: 101.6mm (4 inches)
  • Depth: 147mm (5.8 inches)
  • Height: 25.4mm (1 inch)
  • Weight: 0.68kg (1.5 lbs)

It's important to check the drive's dimension before purchasing to ensure that it will fit in the desired location in your server or storage system. It's also important to check the compatibility of the drive with the system you're planning to use it with, for example, the system should support the PATA interface and also have a PATA controller.

Please note that the drive dimension and weight may vary depending on the specific model and the vendor. Also, the drive may come with a tray or without one, it depends on the specific model and the vendor. You should check the package content for the tray before purchasing.

Product Overview

Manufacturer : Seagate
MPN : ST3750640A
Type : Hard Disk Drive (HDD)
Sub-Type : ATA-IDE
SKU : ST3750640A

Specification
Form Factor : 3.5 Inches
Capacity : 750 GB
Interface Type : ATA-100
Buffer Size : 16 MB

Performance
Drive Transfer Rate : 100 MBPS external
Average Latency : 4.16 MS
Spindle Speed : 7200 RPM

Expansion / Connectivity
Interfaces 1 x IDE/ATAPI - 40 pin IDC
Compatible Bays 1 x internal - 3.5 Inches

Dimension and Weight
Width : 4 Inch
Depth : 5.8 Inch
Height : 1 Inch
Weight : 1.52 LBS

ATA-IDE was the standard interface for computers back in the 1980s and was designed to ensure compatibility with hard drives, CD or DVD drives. ATA-IDE is commonly referred to using other terms such as IDE (Integrated Drive Electronics), ATA, or PATA (Parallel ATA).

IDE is markedly different from ESDI (Enhanced Small Disk Interface) and SCSI since the controllers are found on each drive. Therefore, the ATA-IDE hard drive will connect directly to a controller or motherboard. For the ATA/IDE, data transfer will range between 5MB/s and 133MB/s speeds.

We have integrated drive electronics, IDE, hard drives, IDE connectors, and IDE cables that will help you in upgrading your systems and replacement of components. Depending on your needs, you can get hard drives across different storage capacities and read/write speeds including 160GB-7.2K RPM or 160GB-5.4K RPM, 250GB-7.2K RPM or 250GB-5.4K RPM, 300GB-5.4K RPM or 300GB-7.2K RPM, 320GB-5.4K RPM or 320GB-7.2K RPM, and all the way to 750GB capacity.

Each IDE channel is able to support two drives since the IDE ribbon cable has three connections – one to the motherboard and the other two connections for two drives.

How will your computer tell which drive is which after installation of a new ATA/IDE HDD seeing that you can connect up to 2 drives? The ATA-IDE uses a straight-through cable but can be configured with jumper blocks on the rear of the drive to denote it as primary (master) or secondary (slave). The jumpers are used across the board for optical drives and removable media drives as well. All ATA/IDE disk drives can have three basic configurations that are selected using jumper blocks including master (MA), slave (SL), and cable select (CS, CSEL).

We recommend the following settings at the time of installing a new hard disk or other ATA/IDE device to ensure fast and efficient performance on your computer/system.

  • Master/slave – You need to jumper a drive as master so that it becomes the primary drive on the cable. Where you have both the hard disk drive and optical drive on the same cable, the hard drive must always be jumpered as master. Secondly, the cable should be connected to the ATA/IDE connector number one on the computer motherboard.
  • Slave – You need to jumper a drive as a slave so that it becomes the secondary drive on the cable. In the scenarios where you have both the hard disk and optical drive on the same cable, the rule of thumb is to jumper the optical drive as the slave.
  • Cable select – Finally, the position of the hard disk drive on the cable will determine which drive the system takes to be the master or the slave. The majority of the time, cable select will call for the use of an 80-wire IDE ribbon cable. The 80-wire cables also support Master and Slave settings for the support of two drives. However, we also have the specially designed 40-wire cables that are used by some computer vendors to support cable selection.

There are different types of IDE hard drive disks depending on the system and storage capacity. Hard drives require a cable/connection for both data and power. Unlike SATA, parallel ATA will have cable lengths of up to 18 inches. The ATA-IDE has both a 40-pin connector and an 80-pin connector that are attached to a ribbon cable. The connector in a 40-pin is distinctive in black color, while the 80-pin connector has three colors – black for the master drive, blue for the controller, and gray for the slave drive. For every cable, there are two or three connectors where one connector is attached to the interface that connects to the motherboard while the others are connected to drives.

The 2.5-inch form factor ATA-IDE HDD is commonly used in notebooks or laptop computers makes use of a single 44-pin connection for both data and power. The ATA-IDE hard disks used in desktops make use of a 40-pin connection plus a 4-pin power connector. If you are experiencing challenges installing a new ATA-IDE HDD, it could be that you are having problems with the power and data cables and connectors. We can help you with the right cables to ensure that your computer rig is up and running once again.

We also have integrated motherboards that will support the use of both ATA/IDE and SATA so that you can build systems that meet your needs/specifications. Keep in mind that only one of the two can be used at a given time since both cannot be used simultaneously. Alternatively, we have adapters that will allow the use of an ATA/IDE hard drive with a SATA motherboard and a SATA drive with an IDE motherboard.

Here, you can check more available conditions of your desired product ST3750640A at a competitive price. We are trying our best to meet your needs on the enterprise-level computer, server, data centre, and networking hardware. You are welcome to ask our live chat or get live representative support over the phone.

+

Please choose your location for calculate shipping cost.

Warranty

ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.

What does ALLHDD.Com warranty cover?

30-days to 3 years warranty:

Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.

What is not covered by our warranty?

The reason why our warranty does not cover any problem caused by the following conditions:

(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;

(b) any misuse outside the instructions in the user manual for any specific product;

(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.

What is the Manufacturer/Brand Warranty?

In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).

For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.

Important notes:

We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.

Individual product warranty mentioned on each item product description page/detail page.

Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.

Delivery

Shipping Options and Estimated Delivery Time

UPS Shipping Options:

FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days

UPS 3 Day Select®
Estimated delivery time: 3 business days

UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM

UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.

UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM

UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.

UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday


FedEx Shipping Options:

FedEx Ground®
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.

FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)

FedEx 2Day®
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states

FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)

FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states

FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states


Worldwide Shipping Options:

UPS®/FedEx® International Economy

Estimated delivery time: 4-7 business days

UPS®/FedEx® International Priority

Estimated delivery time: 2-4 business days

UPS®/FedEx® Ground Shipping Canada

Estimated delivery time: 5-8 business days


Important notes:

  • The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
  • We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
  • If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
  • You can estimate the shipping cost from the products detail page, also available on the checkout page
  • The shipping cost depends on box dimensions, weight, and zip/postal code
  • To get a FedEx® delivery service you need to mention it on the checkout page notebox.
  • For urgent shipments, please contact our customer service.
  • Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.