Description
Compatibility with Cisco UCS C-Series Servers
The UCS-PSU-6332-DC Cisco Power Module 930 W -48 V DC is designed to provide power to Cisco UCS C-Series servers. This power module is compatible with a wide range of Cisco UCS C-Series servers, including the following:
- Cisco UCS C220 M3: The UCS-PSU-6332-DC power module is compatible with the Cisco UCS C220 M3 server, which is a rack-mountable server that provides high performance and scalability for a wide range of workloads.
- Cisco UCS C240 M3: The UCS-PSU-6332-DC power module is compatible with the Cisco UCS C240 M3 server, which is a rack-mountable server that provides high performance and scalability for a wide range of workloads.
- Cisco UCS C460 M2: The UCS-PSU-6332-DC power module is compatible with the Cisco UCS C460 M2 server, which is a high-performance, rack-mountable server that provides support for high-end workloads.
- Cisco UCS C480 M5: The UCS-PSU-6332-DC power module is compatible with the Cisco UCS C480 M5 server, which is a high-performance, rack-mountable server that provides support for high-end workloads.
- Cisco UCS C3160: The UCS-PSU-6332-DC power module is compatible with the Cisco UCS C3160 server, which is a high-performance, rack-mountable server that provides support for high-end workloads.
Installation and Configuration
The UCS-PSU-6332-DC Cisco Power Module 930 W -48 V DC is designed to provide power to the Cisco UCS 6332 Fabric Interconnect. It is a hot-pluggable module, which allows for easy replacement without shutting down the Fabric Interconnect.
Here are the steps for installing and configuring the UCS-PSU-6332-DC Cisco Power Module:
- Unpack the power module: Carefully unpack the power module from its packaging and inspect it for any damage.
- Install the power module: Insert the power module into the power supply bay on the Fabric Interconnect. Make sure that the module is securely seated and connected to the power supply connector.
- Connect the power cables: Connect the power cables to the power module. Make sure that the cables are securely connected and not damaged.
- Power on the Fabric Interconnect: Power on the Fabric Interconnect and check the status of the power module in the system log.
- Configure power redundancy: Configure power redundancy on the Fabric Interconnect by setting up an active/standby configuration for the power modules. This will ensure that the Fabric Interconnect continues to operate even if one of the power modules fails.
- Monitor the power module: Monitor the power module status using the Cisco UCS Manager. This will allow you to detect any power supply failures and take appropriate action.
- Replace the power module: In case of a power module failure, the power module can be replaced without shutting down the Fabric Interconnect. Replace the failed power module with a new one and check the status of the power supply in the system log.
It’s important to note that before installing the power module, you need to make sure that the Fabric Interconnect and all other components are powered off. Also, it’s recommended to use the same type of power supply and voltage for the redundant power supply.
Power Efficiency and Energy Savings
The UCS-PSU-6332-DC Cisco Power Module 930 W -48 V DC is designed to provide power to the Cisco UCS 6332 Fabric Interconnect. The power supply is a hot-pluggable module, which allows for easy replacement without shutting down the fabric interconnect.
The UCS-PSU-6332-DC power supply is designed to provide power efficiency and energy savings to help reduce the overall energy consumption of the fabric interconnect.
- Power Efficiency: The UCS-PSU-6332-DC power supply is designed to operate at high efficiency levels, which helps to reduce power consumption and waste heat. The power supply is rated at 94% efficiency at 50% load, which means that only 6% of the power consumed is lost as waste heat.
- Energy Savings: The UCS-PSU-6332-DC power supply supports energy savings features such as power capping, which allows you to limit the amount of power consumed by the fabric interconnect. This feature can help to reduce energy consumption and costs.
- Energy Efficient Mode: The UCS-PSU-6332-DC power supply supports an energy efficient mode, which reduces the power consumption of the power supply when the fabric interconnect is not fully loaded. This feature helps to reduce energy consumption and costs.
- Power Management: The UCS-PSU-6332-DC power supply also supports power management features such as over-current protection, over-voltage protection, and over-temperature protection. These features help to ensure that the power supply does not exceed safe operating limits and protect the fabric interconnect from damage.
- Power Monitoring: The UCS-PSU-6332-DC power supply supports power monitoring features, which allow the fabric interconnect to monitor the status of the power supply and detect any failures. The fabric interconnect can be configured to send SNMP traps or syslog messages in case of a power supply failure.
General Information
- Manufacturer Cisco Systems, Inc
- Manufacturer Part Number UCS-PSU-6332-DC
- Brand Name Cisco
- Product Name Power Module
- Product Type Power Module
Power Description
- Input Voltage -48 V DC
- Output Power 930 W
- Physical Characteristics
Miscellaneous
- Environmentally Friendly Yes
- Environmental Certification RoHS
Please contact us over the phone or ask for live chat/help if you have any questions about the estimated time of arrival for any “lead time required” item.





