615727-001 HP Ethernet 1GB 4 Port 366m Adapter Network New

Performance and speed are critical factors in any networking environment. They determine how quickly data can be transferred between devices and how well the network can handle high levels of traffic. In the case of the HP Ethernet 1GB 4 Port 366m Adapter, its performance and speed are essential in ensuring the smooth functioning of the network it is connected to.

The HP Ethernet 1GB 4 Port 366m Adapter is a network interface card that supports 1 Gigabit Ethernet connections over four ports. Its performance is measured in terms of throughput, latency, and packet loss. Throughput is the amount of data that can be transferred over the network in a given time, typically measured in megabits per second (Mbps) or gigabits per second (Gbps). Latency is the time it takes for a data packet to travel from one device to another, and packet loss is the percentage of data packets that are lost during transmission.

In terms of throughput, the HP Ethernet 1GB 4 Port 366m Adapter is capable of delivering up to 4 Gbps of data transfer rate, with each port supporting up to 1 Gbps of throughput. This level of throughput is ideal for high-bandwidth applications such as video streaming, file sharing, and data backup. It can also handle large amounts of network traffic, making it suitable for use in enterprise-level environments.

When it comes to latency, the HP Ethernet 1GB 4 Port 366m Adapter performs well, with its low latency ensuring that data packets are delivered quickly and efficiently. This is crucial in time-sensitive applications such as online gaming, video conferencing, and financial trading, where even a few milliseconds of delay can be costly.

Packet loss is another critical factor in network performance, and the HP Ethernet 1GB 4 Port 366m Adapter has low packet loss rates, ensuring that data packets are delivered reliably and efficiently. This is especially important in mission-critical applications such as healthcare, aviation, and defense, where data accuracy and reliability are paramount.

Installation and configuration are two critical processes when it comes to setting up any new hardware or software in a network environment. In the case of the HP Ethernet 1GB 4 Port 366m Adapter, the installation and configuration process is relatively straightforward and can be accomplished in a few easy steps.

Installation:

The first step in installing the HP Ethernet 1GB 4 Port 366m Adapter is to ensure that the server or workstation is powered off and unplugged from the electrical outlet. Once this is done, follow these steps:

• Remove the cover of the server or workstation where the adapter will be installed.
• Locate an available PCI Express slot on the motherboard and remove the cover from the slot.
• Carefully insert the adapter into the PCI Express slot and ensure that it is firmly seated.
• Replace the cover of the server or workstation and plug it back in.
• Power on the server or workstation and wait for it to boot up.

Configuration:

Once the adapter is installed, it needs to be configured to work with the network. The configuration process involves setting the IP address, subnet mask, gateway, and DNS server information for the adapter. Here are the steps to configure the HP Ethernet 1GB 4 Port 366m Adapter:

• Open the Network and Sharing Center on the server or workstation where the adapter is installed.
• Click on the "Change adapter settings" option on the left-hand side of the screen.
• Locate the HP Ethernet 1GB 4 Port 366m Adapter and right-click on it.
• Select "Properties" from the drop-down menu.
• In the Properties window, select "Internet Protocol Version 4 (TCP/IPv4)" and click on the "Properties" button.
• In the Internet Protocol Version 4 (TCP/IPv4) Properties window, select "Use the following IP address" and enter the IP address, subnet mask, gateway, and DNS server information provided by the network administrator.
• Click on the "OK" button to save the changes.

Once the configuration is complete, the HP Ethernet 1GB 4 Port 366m Adapter should be ready to use. It is important to note that the adapter may require additional drivers or firmware updates, which can be downloaded from the HP website or provided by the network administrator.

• The HP Ethernet 1GB 4 Port 366m Adapter comes with advanced network management capabilities that allow network administrators to monitor and manage the adapter's performance and configuration. These capabilities include:
• Teaming and VLAN support: The adapter supports link aggregation, which allows multiple network connections to be combined into a single logical connection, providing greater bandwidth and redundancy. The adapter also supports VLAN tagging, which allows network traffic to be segregated based on VLAN tags, enabling more efficient use of network resources.
• Quality of Service (QoS): The adapter supports QoS, which enables administrators to prioritize network traffic based on specific criteria, ensuring that critical applications receive the necessary bandwidth and minimizing latency for time-sensitive applications.
• Remote management: The adapter supports remote management using SNMP (Simple Network Management Protocol), which enables administrators to monitor and manage the adapter's performance and configuration remotely, from a central location.
• Diagnostics and troubleshooting: The adapter includes built-in diagnostics and troubleshooting tools that enable administrators to identify and resolve network issues quickly and efficiently.
• Power management: The adapter supports advanced power management features, which enable administrators to reduce power consumption and lower operating costs, without compromising network performance.
• Performance monitoring: The adapter includes performance monitoring tools that allow administrators to track network performance metrics such as throughput, latency, and packet loss, enabling them to optimize network performance and identify potential bottlenecks.
• Security features: The adapter supports advanced security features, including IPsec offloading, which enables secure communications over the network, and TCP/IP offloading, which reduces the workload on the server's CPU, freeing up resources for other tasks.

• Manufacturer: HP
• Part Number or SKU # 615727-001
• Device Type:Network adapter-4 ports

• Connectivity Technology: Wired
• Data Link Protocol: GigE
• Data Transfer Rate: 1 Gbps
• Features: Fault tolerance, load balancing, Jumbo Frames support, PXE support, Large Send Offload (LSO)

Compliant Standards

• IEEE 802.3, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1as

Processor/Memory

• Processor: 1 x I350 - Intel

Miscellaneous

• Compliant Standards: FCC Class A certified, UL, UL 60950, FCC CFR47 Part 15, WEEE, RoHS

System Requirements

• OS Required: SuSE Linux Enterprise Server, Microsoft Windows Server 2008, Microsoft Windows HPC Server 2008, Oracle Solaris 10, Red Hat Enterprise Linux 6.1, Red Hat Enterprise Linux 5.7, Citrix XenServer 6.0, VMware ESXi 4.1 update 2, VMware ESXi 5.0 update 1, VMware ESX 4.1 update 2

Environmental Parameters

• Min Operating Temperature: 50 °F
• Max Operating Temperature: 95 °F
• Humidity Range Operating: 10 - 90% (non-condensing)

Compatibility Information

• ProLiant BL420c G8 G9 (Gen8 Gen9) BL460c G8 G9 (Gen8 Gen9) BL465c G8 G9 (Gen8 Gen9)