Application Optimization and Performance for Router Chassis
The ASR1002X-CB is a Cisco ASR1002-X Router Chassis that is designed to provide high-performance routing and application optimization capabilities. Some of the key features that support application optimization and performance include:
- Advanced Quality of Service (QoS): The router supports advanced QoS features such as class-based weighted fair queueing (CBWFQ) and low-latency queuing (LLQ) to ensure that mission-critical applications receive the necessary bandwidth and low latency.
- Application Visibility and Control: The router can provide visibility into application traffic and allow for the control of specific applications through the use of application-aware policies.
- Content Engine: The router supports the Cisco Content Engine, which is a specialized module for content inspection, filtering and optimization.
- Application Optimization: The router supports Application Optimization features such as Cisco AppNav and AppNav-XE which are designed to optimize the performance of specific application flows and to control the bandwidth used by different applications.
- Network-based Application Recognition (NBAR): The router supports NBAR, which is a Cisco IOS feature that allows for the recognition and classification of various network applications and protocols.
- Performance Routing (PfR): The router supports PfR, which is a Cisco IOS feature that allows for the optimization of application performance by dynamically selecting the best path for specific application flows.
- High-performance routing: The router has a powerful multi-core CPU and a large amount of memory to handle high-performance routing and fast packet forwarding.
It's recommended to refer to the Cisco documentation for more detailed information and additional features that support application optimization and performance on the ASR1002X-CB router.
Deployment and Installation Considerations of Series 1000 Router
The ASR1002X-CB is a Cisco ASR1002-X Router Chassis that requires careful planning and consideration during the deployment and installation process. Some key considerations include:
- Site preparation: The router should be installed in a location that has proper power, cooling, and physical security. It's important to ensure that the location meets the environmental requirements for the router, including temperature, humidity, and ventilation.
- Power and Cooling: The router requires a specific power supply and cooling. It's important to ensure that the power source and cooling system are adequate to support the router.
- Rack Mounting: The router should be mounted in a rack using the appropriate hardware and following the manufacturer's instructions.
- Network topology: The router should be integrated into the existing network topology in a way that supports the desired network architecture and service level agreements (SLAs).
- Cabling: The router should be properly cabled to ensure optimal performance. This includes connecting the router to the appropriate power source, data interfaces, and management interfaces.
- Firmware and Software: The router should have the appropriate firmware and software version installed, and it should be configured according to the specific requirements of the network.
- Testing and validation: Before going live, it's important to test and validate the router configuration and connectivity. This includes testing the connectivity to the other devices in the network, the routing protocols, and the overall performance.
- Documentation: It's important to document all the steps taken during deployment and installation, including the network topology, the IP addressing scheme, and the configuration settings, to facilitate troubleshooting and maintenance in the future.
It's recommended to refer to the Cisco documentation for more detailed information and best practices for deploying and installing the ASR1002X-CB router.
High-Availability and Redundancy Features
The ASR1002X-CB is a Cisco ASR1002-X Router Chassis that provides a variety of high-availability and redundancy features to ensure that the network remains operational in case of a failure. Some of the key features include:
- Dual Route Processor (RP) Redundancy: The router has dual RP redundancy, which allows for the use of two route processors to share the load and provide redundancy in case one RP fails.
- Hot Standby Router Protocol (HSRP): The router supports HSRP, which allows for the configuration of a virtual IP address that can be shared by multiple routers. This allows for automatic failover in case the active router fails.
- Virtual Router Redundancy Protocol (VRRP): The router supports VRRP, which is similar to HSRP but it's a Cisco proprietary protocol.
- Non-Stop Forwarding with Stateful Switchover (NSF/SSO): The router supports NSF/SSO, which allows for the forwarding of packets to continue during a switchover event, without loss of packets or interruption of services.
- Flexible Netflow (FNF): The router supports FNF which is a feature that enables the collection of data on network traffic flows, it can be used to monitor and troubleshoot network performance issues.
- Graceful Restart: The router supports Graceful Restart, which allows for the router to restart without interrupting network traffic.
- Redundant Power Supply: The router has an option for a redundant power supply, which allows for the use of two power supplies to provide redundancy in case one power supply fails.
It's recommended to refer to the Cisco documentation for more detailed information and additional high-availability and redundancy features available on the ASR1002X-CB router.
Key Feature about this Cisco ASR1002X-CB
- Manufacturer Cisco
- Manufacturer Part Number ASR1002X-CB
- Product Series 1000
- Product Model 1002
- Product Name 1002 Router Chassis
- Product Type Router Chassis
About Refurbished Products
Routers lead the line as the first line of network security in homes and offices. It prevents intrusion into a network while creating a firewall to provide the highest level of security on several network types. They are the best ways of keeping computer systems, network systems, and information contained in them safe from intrusion.
A router is designed to be more capable than several other network devices such as hubs or switches that can only carry out basic network functions. For instance, a hub only transfers data between network devices without analyzing or doing anything with those data. On the other hand, routers are able to analyze data sent between network devices. They can change the packaging of such data and send it over to a different network.
Routers are the perfect devices to share an internet connection between multiple computers in home networks. A router typically connects to the modem using a network cable. Router networking occurs via a WAN port or the internet. There are also wireless routers that connect to devices using different wireless standards.
Important Features
Multi-core Processor
The hardware inside these routers allows them to cope with several network use at the same time. Many of these routers come with dual-core and quad-core processors. These processor options allow them to handle lots of data more effectively. Users can use their Wi-Fi routers for activities such as video streaming, online gaming, data backups, and more. Even while carrying out those operations, the routers perform at the highest levels.
Multi-band options
Users will get routers that broadcast wireless signals over two frequencies (for dual-band) or more (for tri-band and others). These routers run at frequencies that can cover a wide expanse of area. They are not congested and are perfect for office buildings, homes, and large enterprises. Clients will find routers that emit their signals between 2.4 GHz and 5 GHz.
Built-in Security Features
These router networking devices also come with security features such as device quarantine, firmware updates, automatic updates, and more. The features allow them to provide network-level protection against attacks. With these features, cyber criminals will be unable to infiltrate home networks.
Types of Routers
There are several types of routers that users can benefit from. Some of them include:
- Core Routers. These are the types used by Internet Service Providers. They are the fastest and most powerful types. They sit at the center of the internet and forward data through the main fiber Optics.
- Wireless Routers. These work in a similar manner as a home or business LAN. However, they give room for better mobility for laptops, tablets, and other portable devices. These types offer transmission over short distances.
- Enterprise Routers. These are the types employed by large companies. Organizations use enterprise routers to connect their networks to these core routers.
- Branch Routers. These types connect an enterprise's remote offices to its Wide Area Network (WAN). They come with improved features such as wireless LAN management, time-division multiplexing, WAN acceleration, and more.
- Edge Routers. These are the most commonly used types in homes and small businesses. They are low-capacity devices that connect to the public internet or private WAN, or external LAN.
- Logical Routers. They function similarly to hardware to create several network routes.
Warranty
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
Important notes:
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Delivery
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
FedEx Ground®
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
FedEx 2Day®
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
Important notes:
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.
