Introduction to Dell 370-ABUI 4GB
The Dell 370-ABUI 4GB 2133MHz PC4-17000 ECC Reg DDR4 SDRAM is a type of memory module that is designed specifically for use with Dell servers and workstations. Memory modules are an essential component of any computer system, as they provide a place for the computer to store and access data as it performs its various tasks.
The Dell 370-ABUI memory module has a capacity of 4GB, meaning that it can store up to 4 gigabytes of data at a time. It is also designed to operate at a speed of 2133 megahertz, making it a relatively fast memory module that can help to improve the overall performance of a Dell server or workstation.
One of the key features of the Dell 370-ABUI memory module is its ECC (Error-Correcting Code) technology. ECC is a type of memory error correction that can help to detect and correct errors that occur when data is being read or written to memory. This can help to ensure that the data stored in memory is accurate and reliable, which is especially important in critical applications where data integrity is essential.
The Dell 370-ABUI memory module also features Reg (Registered) technology, which is a type of memory buffering that can help to improve the stability and reliability of the memory module. Reg technology helps to reduce electrical load and noise on the memory bus, which can help to prevent errors and ensure that data is transferred smoothly and efficiently.
Benefits of ECC Reg DDR4 SDRAM
ECC Reg DDR4 SDRAM (Error-Correcting Code Registered Double Data Rate 4 Synchronous Dynamic Random Access Memory) is a type of computer memory that is designed to provide enhanced reliability and data integrity compared to standard memory modules. Here are some of the benefits of ECC Reg DDR4 SDRAM:
- Error Detection and Correction: ECC Reg DDR4 SDRAM is designed with additional memory chips that are used to store parity bits. These parity bits are used to detect and correct errors that may occur when data is read from or written to the memory. This means that the memory can automatically detect and correct single-bit errors, which can help to prevent data corruption and system crashes.
- Improved Reliability: ECC Reg DDR4 SDRAM uses registered memory technology, which is a type of memory buffering that helps to reduce electrical load and noise on the memory bus. This can help to improve the stability and reliability of the memory module, which can help to prevent system crashes and other issues that can be caused by unstable memory.
- Higher Performance: ECC Reg DDR4 SDRAM is designed to operate at higher speeds than standard memory modules, which can help to improve the overall performance of a computer system. This can be especially important in applications that require high levels of processing power, such as scientific computing, 3D modeling, and video editing.
- Improved Data Integrity: ECC Reg DDR4 SDRAM can help to ensure that data is stored and retrieved accurately, which is especially important in applications that require high levels of data integrity, such as financial transactions or medical record keeping. By detecting and correcting errors in real-time, ECC Reg DDR4 SDRAM can help to ensure that data is accurate and reliable.
Installation Process for Dell 370-ABUI Memory Module
The installation process for the Dell 370-ABUI memory module is a relatively simple process that can be completed by anyone with basic computer hardware knowledge. Here are the steps to install the Dell 370-ABUI memory module:
- Turn off the Dell server or workstation: Before installing the memory module, it is important to power off the server or workstation to avoid any risk of electrical shock or damage to the memory module or the computer.
- Open the computer case: Depending on the specific model of the Dell server or workstation, the case may be secured by screws, latches, or other mechanisms. Follow the manufacturer's instructions to open the case and gain access to the memory slots.
- Locate the memory slots: The memory slots on a Dell server or workstation are typically located near the center of the motherboard. They are usually labeled with a code or number that corresponds to the specific slot.
- Remove any existing memory modules: If there are any existing memory modules in the memory slots, they will need to be removed before installing the new memory module. To remove a memory module, gently press down on the clips on either side of the module until it pops out of the slot.
- Install the new memory module: Hold the new memory module by its edges and align the notches on the module with the key in the memory slot. Insert the module into the slot at a 45-degree angle and press down until the clips on either side of the slot click into place.
- Close the computer case: Once the new memory module is installed, replace the computer case and secure it with any screws or latches that were removed.
- Power on the Dell server or workstation: After the computer case is closed, power on the server or workstation to ensure that the memory module is properly recognized and configured by the system.
In summary, the installation process for the Dell 370-ABUI memory module involves opening the computer case, locating the memory slots, removing any existing memory modules, and installing the new memory module. With proper care and attention to detail, this process can be completed quickly and easily to improve the performance and reliability of a Dell server or workstation.
- Manufacturer: Dell
- Part Number or SKU# 370-ABUI
- Type: Memory (RAM)
- Sub-Type: Pc4-17000
- Product Name: 4GB DDR4 SDRAM Memory Module
- Storage Capacity: 4GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 1 X 4GB
- Bus Speed: 2133 MHz Ddr4-2133/pc4-17000
- Data Integrity Check: Ecc
- Signal Processing: Registered
- Cas Latency Timings: Cl15
- Ram Features: Single Rank, Ultra Low Voltage
- Voltage: 1.2v
- Dimensions (W X D X H): 8.89 X 19.81 X 1.91 Cm (3.5 X 7.8 X 0.75 In)
- Weight: 0.45 Kg (1 Lb)
- PowerEdge C4130
- PowerEdge Fc630
- PowerEdge M630
- PowerEdge R430
- PowerEdge R530
- PowerEdge R630
- PowerEdge R730
- PowerEdge R730xd
- PowerEdge T430
- PowerEdge T630
- Precision Workstation R7910 Xl
- Precision Workstation T5810 Xl
- Precision Workstation T7810 Xl
- Precision Workstation T7910 Xl
- Precision Workstations R7910
- Precision Workstations T5810
- Precision Workstations T7810
- Precision Workstations T7910
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model's matching features with your current system.
About New Bulk Pack Products
Huge server rooms and vast business centers are the way to the modern world but have you ever wondered how to speed things up? The faster data loading speeds and transfer rates can only be achieved with the modernly designed RAMs or memory modules. SDRAMs are a way to deal with the ballooning up networking needs and data access issues! We, at ALLHDD, got you covered with the PC4 17000 RAM featuring the ECC certified memory modules with a bandwidth of 4GB to 768GB. Here's what you need to know further about the PC4 17000 memory modules for your Proliant servers.
PC4 17000 Has The Unmatchable Latency!
Latency refers to the memory timings, which can be regarded as the breakdown of how fast the RAM can load data and access it from the hard drive. Memory timings measure the nanosecond unit and are symbolized as CL.
Thus, the higher the clock speed, the lower will be the Latency, as in the case of PC4 17000. In simpler terms, the DDR3 memory modules were operating on the CL11, which utilizes 13.75 nanoseconds while reading the data. On the flipside, PC4-17000 DDR4 runs on the CL15, making them use the 14.06 seconds to complete a read or task.
Dual Rank Vs. Single Rank DIMM PC4-17000 Memory Modules
The memory modules are being judged by the DIMMs as well. It's noteworthy to check whether the RAM is loaded with a suitable number of RANKs. Each channel must be loaded with the appropriate number of channels for optimal performance and extreme durability. Most commonly, the dual-ranked DIMMs serve the purpose in most of the systems. For instance, the dual-rank DIMMs can increase the performance by 7% compared to the single-rank DIMMs.
We, at ALLHDD, have covered the range of 16GB, 24GB, 32GB, 64GB, and 96GB RAMs with the single rank and dual rank channel memory. Not just this, but a little upgrade from both of these ranks is the Quad-Rank channel memory. ALLHDD also brought you the 128GB, 192GB, 256GB, and 384GB PC4-17000 RAMs with the quad-rank support in some models.
RDIMMs Support Faster Run Rate:
The main difference between the RDIMMs and LRDIMMs for the tech-savvies lies in the speed and Latency! The higher memory density calls for the LRDIMMs, while on the flip side, the higher rate with low Latency can be regulated via the RDIMMs. Also, the RDIMMs memory modules run faster than the previous generation RAMs and their similar companion, i.e., LRDIMMs. The reason being the clock signals and command/address buffered without any hassle.
Some models of PC4 17000 are also 288-pin LRDIMM in the 12GB and 512GB category. The LRDIMMs have their perks in terms of DRAM capacity. The data bits are buffered in the data buffers, maximizing the data transfer speeds.
Why Buy From ALLHDD?ALLHDD brought you the immense choice in the DDR4 PC4-17000 category in almost all the bandwidths to help you get the right deal. We have products ranging from 4GB to 768GB with ECC certification, LRDIMMs, RDIMMs, and 288-pin nodule capacity. Many products are factory sealed with 3 to 5 years of the warranty period from the manufacturer. You can also claim a 2.5% discount for most of the high-performing Dual-rank or Quad-rank memory modules for Proliant servers.
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.