Description
Performance and Speed
The 789897-001 HPE Ethernet Pci Express 331 FLR 1GB 4 Ports Network Adapter is a high-performance network adapter designed for use in HPE server systems. It features four Gigabit Ethernet ports, which provide a maximum data transfer rate of 1 Gbps (gigabit per second) per port. This allows for high-speed communication and data transfer between multiple devices on a network.
The adapter also uses a PCI Express interface, which provides a high-bandwidth connection to the system’s motherboard. This allows for faster data transfer and improved performance compared to traditional PCI interfaces.
Additionally, the adapter supports FLR (Flexible LOM or LAN on Motherboard) technology, which allows for easy integration and management of the network adapter in HPE server systems. This includes the ability to configure and manage the adapter through HPE’s integrated management tools, such as HPE Integrated Lights-Out (iLO) and HPE OneView.
Installation and Setup
The 789897-001 HPE Ethernet Pci Express 331 FLR 1GB 4 Ports Network Adapter is a network card that can be installed in a computer to add four Gigabit Ethernet ports. The installation and setup process for this adapter involves a few steps:
- First, ensure that the computer system meets the minimum requirements for the adapter. This includes having an available PCI Express slot and compatible operating system.
- Next, shut down the computer and unplug it from the power source. Open the computer case and locate the PCI Express slot.
- Carefully insert the adapter into the PCI Express slot, making sure it is securely seated and the locking mechanism is engaged.
- Close the computer case and plug the computer back in to the power source.
- Start up the computer and allow it to fully boot up. The operating system should automatically detect the new adapter and install the necessary drivers.
- Once the drivers are installed, go to the device manager or network settings in the operating system to confirm that the adapter is recognized and properly configured.
- Connect the Ethernet cables to the adapter’s ports and test the connection by pinging a known IP address or accessing a website.
- Finally, configure any necessary network settings such as IP addresses and network protocols to ensure proper communication with other devices on the network.
Compatibility
789897-001 HPE Ethernet Pci Express 331 FLR 1GB 4 Ports Network Adapter is a network adapter that is designed to work with HPE servers and other HPE hardware. It is compatible with the PCI Express 3.1 interface and has four ports for connecting to Ethernet networks. The adapter supports speeds of up to 1 Gbps and is fully compliant with the FLR (FlexibleLOM) standard. This means that it can be easily integrated into HPE servers and other hardware without the need for additional configuration or software. Overall, the 789897-001 HPE Ethernet Pci Express 331 FLR 1GB 4 Ports Network Adapter is a reliable and high-performance network adapter that is specifically designed to work with HPE servers and other HPE hardware.
GENERAL INFORMATION 789897-001 HPE Ethernet 1GB 4-Port 331flr:
Device Type : Network Adapter
Form Factor : Plug-In Card
Interface (Bus) Type : Pci Express 2.0 X4
Networking:
Ports : Gigabit Ethernet X 4
Connectivity Technology : Wired
Data Link Protocol : 10MB Lan, 100MB Lan, Gige
Data Transfer Rate : 1 GBPS
Network / Transport Protocol : Tcp/Ip, Udp/Ip
Remote Management Protocol : Snmp
Status Indicators : Link Activity, Port Transmission Speed
Features : Vlan Support, Full Duplex Mode, Jumbo Frames Support, Pxe Support, Large Send Offload (Lso), Energy Efficient Ethernet, Tcp Segmentation Offload (Tso), Extended Message-Signaled Interrupts (Msi-X), Tcp/Ip Checksum Offload, Udp/Ip Checksum Offload
Compliant Standards : IEEE 802.3, IEEE 802.3u, IEEE 802.1q, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3ad (Lacp), IEEE 802.1as, IEEE 802.3Az
Expansion / Connectivity:
Expansion Slots : 1 X Flexiblelom
Interfaces : 4 X Ethernet 1000 – Rj-45
