Description
Maintaining the HPE Storefabric SN1200E
To maintain the HPE Storefabric SN1200E 16GB Single Port Fibre Channel Host Bus Adapter with part number 870001-001, the following steps can be followed:
- Firmware updates: Regular firmware updates are important to keep the adapter running optimally. Firmware updates can be done using HPE Service Pack for ProLiant or HPE Smart Update Manager.
- Driver updates: Regular driver updates are also important for the adapter to function properly. The latest drivers can be found on the HPE website.
- Cleaning: Dust accumulation on the adapter can lead to overheating. Clean the adapter periodically with a soft cloth.
- Power cycle: It is recommended to power cycle the server and adapter periodically to ensure they are functioning optimally.
- Monitoring: Regular monitoring of the adapter’s performance is important to detect any issues and resolve them in a timely manner.
It is recommended to follow the manufacturer’s guidelines for maintaining the adapter and to seek professional assistance if needed.
Upgrading the HPE Storefabric SN1200E
To upgrade the HPE Storefabric SN1200E to the HPE Storefabric SN1600E 32GB Single Port Fibre Channel Host Bus Adapter with part number 870001-001, the following steps need to be taken:
- Gather the necessary tools and equipment – Before beginning the upgrade, you will need to have a Phillips screwdriver and antistatic wrist strap.
- Prepare the server – Make sure the server is powered off and unplugged from the electrical outlet.
- Install the new adapter – Locate the HBA slot on the server, remove the existing SN1200E adapter, and install the new SN1600E adapter into the same slot. Secure the adapter with screws.
- Connect the fibre cables – Connect the fibre cables to the new adapter.
- Power on the server – After connecting the fibre cables, plug the server back into the electrical outlet and power it on.
- Install the drivers – Install the latest drivers for the SN1600E adapter. This can be done through the operating system or through the HPE website.
- Confirm the upgrade – Confirm the upgrade by checking the device manager and verifying that the new adapter is recognized and functioning correctly.
It is recommended to follow the HPE guidelines and best practices when upgrading the adapter. If unsure, it is recommended to seek the help of a trained professional.
Troubleshooting the HPE Storefabric SN1200E
Here are some common troubleshooting steps for the HPE Storefabric Sn1200e 16GB Single Port Fibre Channel Host Bus Adapter (part number 870001-001):
- Check the connectivity: Ensure that the host bus adapter, cable, and storage system are properly connected and the cable is not damaged.
- Check the driver and firmware versions: Make sure that you are using the latest version of the driver and firmware for your adapter.
- Check the event log: The event log may contain information about any errors or issues with the adapter.
- Check the settings: Ensure that the correct settings are configured for the adapter, such as speed and duplex.
- Check the operating system and server compatibility: Make sure that the adapter is supported by your operating system and server.
- Try a different cable: If the issue persists, try a different cable to eliminate cable as the cause.
- Replace the adapter: If none of the above steps resolve the issue, the adapter may need to be replaced.
It is recommended to consult the HPE support website for additional troubleshooting steps and support information.
Product Information
- Manufacturer Name: HPE
- MPN: 870001-001
- Type: Controller
- Controller Type: Host Bus Adapter
- Option Part Number: Q0L13A
Technical Information
- Form Factor: Plug-in card – low profile
- Interface (Bus) Type: Fibre Channel
- Ports: 16 GB Fibre Channel x 1
- Connectivity Technology: Wired
- Cabling Type: Fiber optic
- Data Link Protocol: 16 GB Fibre Channel
Expansion / Connectivity
- Interfaces: 1 x 16 GB Fibre Channel
Software / System Requirements
- OS Required: SUSE Linux Enterprise Server, Red Hat Enterprise Linux, Microsoft Windows Server 2008 (32/64-bits), VMware ESXi, VMware ESX, Microsoft Windows Server 2008 R2 (64-bits)
Compatibility
- HPE ProLiant DL Series: DL360 Gen10, DL360 Gen10 Base, DL360 Gen10 Entry, DL360 Gen10 High Performance, DL360 Gen10 Low, DL360 Gen10 Performance, DL360 Gen10 Solution



-324x324.jpg)

