Description
Key Features
- 24 Ports: The JC102B HPE switch has 24 ports, providing ample connectivity options for devices and networks.
- Managed Switch: The switch is managed, meaning it can be configured and monitored remotely using a web interface or command-line interface. This allows for greater control and visibility over the network.
- Rack-Mountable: The switch is designed to be mounted in a standard 19-inch rack, making it easy to integrate into existing network infrastructure.
- VLAN Support: The switch supports Virtual LANs (VLANs), allowing for segmentation of the network and better security.
- Quality of Service (QoS): The switch has QoS capabilities, which allows for prioritization of network traffic based on different criteria, such as IP address or port number.
- Link Aggregation: The switch supports Link Aggregation, which allows for combining multiple network connections into a single logical connection, providing increased bandwidth and redundancy.
- Energy Efficient Ethernet (EEE): The switch supports EEE, which reduces power consumption when the switch is in low-power mode.
- Advanced Security: The switch supports advanced security features such as MAC-based Access Control Lists (ACLs) and IEEE 802.1X port-based network access control.
- Firmware Upgradeable: The switch’s firmware can be upgraded, allowing for the addition of new features and bug fixes.
- SNMP Support: The switch supports Simple Network Management Protocol (SNMP), allowing for the monitoring and management of the switch using network management software.
Network Management
The JC102B HPE 24 Ports Managed Rack-Mountable Switch is a network management device that is designed for use in a rack-mountable setup. It is a managed switch, meaning that it has a built-in web interface or command-line interface that allows for the configuration and management of the switch. This includes features such as VLANs, Quality of Service (QoS), and access control.
The switch has 24 ports, which means that it can connect to 24 different devices or networks. These ports can be configured for different types of connections, such as Ethernet or Fiber Optic. Additionally, the switch can be configured to support various network protocols, such as IPv4 and IPv6.
One of the key features of the JC102B HPE switch is its ability to be managed remotely. This means that administrators can remotely access and configure the switch, even if they are not physically present at the location of the switch. This can be done using a web interface or a command-line interface, depending on the administrator’s preference.
Power and Performance
The JC102B HPE 24 Ports Managed Rack-Mountable Switch is a high-performance, rack-mountable switch designed for use in enterprise networks. It is a managed switch, which means it can be configured and monitored through a web interface or command-line interface.
The switch has 24 ports, which allows for a large number of devices to be connected to the network. These ports can support various speeds, including 10/100/1000Mbps Ethernet, providing flexibility for different types of devices and network needs.
The switch also has advanced features such as Quality of Service (QoS) and VLAN support, which allows for better control of network traffic and improved security. Additionally, it supports link aggregation, which allows multiple ports to be grouped together to increase bandwidth and improve resiliency.
The JC102B HPE 24 Ports Managed Rack-Mountable Switch also has a high power rating, which allows for higher throughput and improved performance. This makes it suitable for use in high-demand environments such as data centers and large enterprise networks.
General Information about the HPE JC102B
- Manufacturer: HPE
- Manufacturer Part Number: JC102B
- Type: Networking Switch
Technical Information
- Enclosure type : rack-mountable – 1u
- Subtype : 10 gigabit ethernet
- Ports : 24 x 10 gigabit sfp+ + 4 x 10/100/1000
- Performance : Throughput (64-Byte Packet Size) : 363 Mpps ¦ Routing/Switching Capacity : 488 Gbps ¦ Latency (64-Byte Packets) : 2.02 µs
- Capacity : ipv4 routing table entries : 12000
- Mac address table size : 32k entries
- Routing protocol : ospf, bgp-4, is-is, rip-1, rip-2, bgp, igmpv2, igmp, vrrp, ospfv2, pim-sm, static ip routing, pim-dm, igmpv3, ospfv3, pim-ssm, msdp, vrrpe, policy-based routing (pbr), ripng, mldv2, mld, is-isv6, bgp-4+
- Remote management protocol : snmp 1, snmp 2, rmon 1, telnet, snmp 3, snmp 2c, https, ssh, cli
- Encryption algorithm : pki
- Authentication method : secure shell (ssh), radius, tacacs, secure shell v.2 (ssh2), hwtacacs
- Ram : 2 gb – sdram
- Flash memory : 512 mb
Product Features
- Flow Control
- Layer 3 Switching
- Layer 2 Switching
- Dhcp Support
- Auto-Negotiation
- Arp Support
- Load Balancing
- Vlan Support
- Auto-Uplink (Auto Mdi/Mdi-X)
- Igmp Snooping
- Dos Attack Prevention
- Packet Filtering
- Port Mirroring
- Weighted Round Robin (Wrr) Queuing
- Store And Forward Ipv6 Support
- Full Duplex Mode
- Weighted Fair Queuing (Wfq)
- Weighted Random Early Detection (Wred)
- Sflow Dhcp Snooping
- Access Control List (Acl) Support
- Quality Of Service (Qos)
- Jumbo Frames Support
Expansion / Connectivity
- 4 x 1000base-t – rj-45
- 1 x console – rj-45 – management
- 24 x 10gbit lan – sfp+
Power
- Power device : internal power supply
- Installed qty : 2 (max)
- Voltage required : ac 120/230 v ( 50/60 hz )
