Description
Safety Precautions for Installation
- Always use appropriate personal protective equipment, such as gloves and safety glasses, when installing the power supply.
- Make sure the equipment is properly grounded and that the power source is suitable for the power supply.
- Do not touch the electrical contacts or the internal components of the power supply while it is plugged in or connected to power.
- Ensure that the air flow in the equipment cabinet is adequate to prevent overheating of the power supply.
- Make sure that the power supply is securely mounted to prevent it from shifting or falling.
- Do not install the power supply in a location that is exposed to direct sunlight, moisture, or extreme temperatures.
- Follow all electrical safety codes and regulations when installing the power supply.
- Do not attempt to modify or repair the power supply, as this could lead to electrical shock or fire.
- When connecting the power supply to the equipment, ensure that the connections are secure and that the cable is properly routed to prevent damage.
- After installation, perform a visual inspection of the power supply to ensure that it is properly installed and functioning correctly.
Technical specifications
- Power Capacity: 500 Watt
- Output Voltage: 12 VDC
- Power Type: Platinum Level Efficiency
- Compatibility: Cisco Nexus 3064-T Switch
- Dimensions: 9.76 x 4.13 x 1.61 inches (24.8 x 10.5 x 4.1 cm)
- Weight: 4.75 lbs (2.15 kg)
- Input Voltage Range: 100-240 VAC, 50-60 Hz
- Operating Temperature: 32°F to 104°F (0°C to 40°C)
- Storage Temperature: -40°F to 158°F (-40°C to 70°C)
- Humidity: 10-90% non-condensing relative humidity.
Verifying the Power Supply Configuration
To verify the power supply configuration of the NXA-PAC-500W Cisco Nexus 3064-T 500 Watt Platinum Power Supply, follow these steps:
- Log in to the Cisco Nexus switch through the command-line interface (CLI).
- Type the command “show power” and press Enter.
- The output will display the power supply configuration, including the type, state, and power usage.
- Check if the type of power supply is listed as “NXA-PAC-500W.”
- Check if the state of the power supply is listed as “OK.”
- Check if the power usage is within the acceptable range for the switch.
- If the power supply configuration is correct, it is verified.
- If there are any issues with the power supply configuration, consult the Cisco Nexus documentation or contact technical support for assistance.
General Information
- Manufacturer: Cisco Systems, Inc
- MPN: NXA-PAC-500W
- Product Name Proprietary Power Supply
- Product Type Proprietary Power Supply
Miscellaneous
Compatibility Cisco Nexus 3064-T Switch
