Description
Cable Length and Distance Support
The QSFP-H40G-AOC30M is a 30-meter-long Cisco QSFP+ Active Optical Cable (AOC) that is designed for use in high-speed data center applications. It is capable of transmitting data at speeds of up to 40 Gigabits per second (Gbps).
One of the main advantages of the QSFP-H40G-AOC30M is its length. At 30 meters, it is suitable for connecting devices that are located farther apart, such as those in separate racks or across different rooms.
The distance support of the QSFP-H40G-AOC30M can be affected by factors such as the quality of the cable, the temperature of the environment, and any signal interference. It is important to ensure that the cable is of high quality and that it is installed in a suitable environment to achieve the best performance.
Installation and Configuration
The QSFP-H40G-AOC30M Cisco 30M QSFP+ Active Optical Cable is a high-speed cable designed to provide reliable and efficient connectivity between networking devices that support QSFP+ interfaces. Here are the steps to install and configure this cable:
Installation:
- Ensure that the devices you are connecting the cable to support QSFP+ interfaces.
- Remove the protective caps from the QSFP+ connectors on both ends of the cable.
- Insert one end of the cable into the QSFP+ port on one of the devices, making sure that the connector is securely in place.
- Insert the other end of the cable into the QSFP+ port on the other device, making sure that the connector is securely in place.
- Verify that the devices recognize the cable and establish a link.
Configuration:
The QSFP-H40G-AOC30M Cisco 30M QSFP+ Active Optical Cable is a plug-and-play device, which means that no configuration is required. However, you can configure the devices it connects to as needed. Here are some tips:
- Verify that the devices are set up to use the correct network settings, such as IP address, subnet mask, and default gateway.
- Configure any necessary network protocols, such as VLANs, OSPF, or BGP, to ensure that the devices can communicate with each other.
- Verify that the devices are configured to use the appropriate speed and duplex settings to ensure optimal performance.
- Use any available network management tools to monitor the performance of the devices and the cable, and make any necessary adjustments to optimize performance.
Low Power Consumption
The QSFP-H40G-AOC30M Cisco 30M QSFP+ Active Optical Cable is designed to be an energy-efficient solution for high-speed data center interconnects. Compared to traditional copper cables, which require power-hungry signal regenerators and other networking components, the QSFP-H40G-AOC30M AOC consumes significantly less power.
The QSFP-H40G-AOC30M uses optical fiber technology to transmit data, which requires less power than copper-based solutions. In addition, the cable incorporates power-saving features, such as the ability to enter low-power mode when not in use.
By reducing power consumption, the QSFP-H40G-AOC30M can help data center operators reduce their energy bills and meet their sustainability goals. It also generates less heat, which can help improve overall data center efficiency by reducing the need for additional cooling.
General Information
- Manufacturer: Cisco
- Manufacturer Part Number: QSFP-H40G-AOC30M
- Brand Name: Cisco
- Product Type: Network Cable
Technical Information
- Cable Type: Fiber Optic
- Cable Length: 98.43 ft
- Features: Active
- Device Supported: Network Device
- Data Transfer Rate: 5 GB/s
