Description
Installation Process for SCSI
Introduction: The installation process for the WJ038 Dell SCSI Hot Swap Hard Drive Sled Tray Bracket is straightforward and can be completed in a few steps. The process is the same for both Poweredge and Powervault Servers.
Tools Required: To install the WJ038 Dell SCSI Hot Swap Hard Drive Sled Tray Bracket, you will need a screwdriver, an antistatic wrist strap, and a pair of pliers.
Prepare the Hard Drive: The first step is to prepare the hard drive for installation. You will need to attach the SCSI cable and power cable to the hard drive and secure it with screws. Make sure the cables are properly connected and tightened.
Install the Hard Drive into the Sled: Next, you will need to place the hard drive into the WJ038 Dell SCSI Hot Swap Hard Drive Sled Tray Bracket. The hard drive should fit snugly into the bracket, and the connectors should align with the holes in the bracket.
Secure the Hard Drive with Screws: Once the hard drive is in place, secure it with the screws provided with the sled. Make sure the screws are tightened securely to avoid any movement of the hard drive while in use.
Insert the Sled into the Server: The final step is to insert the WJ038 Dell SCSI Hot Swap Hard Drive Sled Tray Bracket into the server. The sled should snap into place securely, and the connectors should align with the server’s connectors.
Power On the Server: Once the sled is in place, power on the server, and it should recognize the new hard drive. You can check the server’s management interface to verify that the hard drive is recognized and operational.
Technical Specification
The technical specifications of the WJ038 Dell SCSI Hot Swap Hard Drive Sled Tray Bracket include:
Dimensions: The sled tray is designed to fit within the standard 3.5-inch drive bay of Dell Poweredge and Powervault servers.
Compatibility: The WJ038 Dell SCSI Hot Swap Hard Drive Sled Tray Bracket is compatible with Dell SCSI hard drives, including both SAS and SCSI drives.
Connectivity: The sled tray features a 68-pin wide Ultra-160/m SCSI interface, providing high-speed connectivity to the server.
Material: The sled tray is made of high-quality plastic, ensuring durability and reliability.
Installation: The WJ038 Dell SCSI Hot Swap Hard Drive Sled Tray Bracket is designed to be easily installed within the server, allowing for quick and convenient drive swaps.
Hot Swap Capability: The sled tray is designed to allow for hot swappable hard drives, allowing for easy drive replacement without having to power down the server.
LED Indicators: The sled tray features LED indicators, providing status information about the hard drive.
Latch System: The sled tray features a secure latch system, ensuring that the hard drive is securely held in place.
Poweredge and Powervault Server
Dell PowerEdge and PowerVault servers are data center computing solutions offered by Dell Technologies. PowerEdge servers are designed for businesses and organizations, and are used for running a variety of applications such as databases, virtualization, and data analysis. PowerVault servers, on the other hand, are designed for storage and data management solutions, providing scalable and flexible storage options for businesses of all sizes. The WJ038 SCSI hot swap hard drive sled tray bracket is a component used in these servers to allow for the easy installation and removal of hard drives while the server is still running. This helps to minimize downtime and increase the overall efficiency of the data center.
General Information
- Part No. # WJ038
- Manufacturer : Dell
Compatibility
- Poweredge 700, 800, 1600, 1600sc, 1800, 1850, 2600, 2650, 2800, 2850, 3250, 6600, 6650, 6800, 6850, 7150, Series Servers And Powervault 220s, 221s, 220f, 650f, 660f Scsi Arrays
Key Features
- Cabinet Type : Internal Drive Case
- Modules Qty. : 1
- Storage Controller :
- Supported Devices : Hard Drive
