Description
Security and Management
J6057-60002 is the part number for the HP Jetdirect 615N internal print server card. This card is designed to be installed inside a printer and provides network connectivity, allowing users to print to the printer from any device connected to the network.
When it comes to security, the HP Jetdirect 615N supports several encryption methods, including 802.1X authentication and SNMPv3. It also has a built-in firewall that can be configured to block unauthorized access to the printer and its data.
In terms of management, the HP Jetdirect 615N can be managed remotely using a web browser or command-line interface. It also supports SNMP, allowing it to be monitored and managed using network management tools.
Additionally, the HP Jetdirect 615N supports a variety of printing protocols, including TCP/IP, IPX/SPX, AppleTalk, and DLC/LLC. It also has a built-in web server that provides status information and allows for configuration changes.
Troubleshooting and Maintenance
J6057-60002 HP Jetdirect 615N is an internal print server card that allows printers to be connected to a network. If you are experiencing issues with your print server, the following troubleshooting steps and maintenance tips may help:
- Check the connections: Make sure that the print server is properly connected to the printer and the network. Check the cables to ensure they are not damaged or loose.
- Check the network settings: Ensure that the network settings on the print server are correct. Check the IP address, subnet mask, and gateway settings.
- Restart the print server: Try restarting the print server by turning it off and on again.
- Reset the print server: If restarting doesn’t work, try resetting the print server to its default settings. The reset button is usually located on the back of the print server.
- Check for firmware updates: Check for firmware updates for the print server on the HP website. Installing the latest firmware may help to resolve any issues.
- Clean the print server: Dust and debris can accumulate on the print server, which can cause it to malfunction. Use a soft, dry cloth to clean the print server.
- Replace the print server: If none of the above steps work, it may be necessary to replace the print server.
Compatibility and System Requirements
J6057-60002 HP Jetdirect 615N Internal Print Server Card is a network interface card that allows printers to be connected to a network. The compatibility and system requirements of this card are as follows:
- Compatibility: The J6057-60002 HP Jetdirect 615N Internal Print Server Card is compatible with most HP printers that have an EIO slot. It is also compatible with other printers that support network connectivity via an external print server.
- Network Connectivity: The card requires a 10/100Base-T network connection and supports TCP/IP, IPX/SPX, AppleTalk, DLC/LLC, and NetBEUI protocols. The card can be connected to the network via a standard Ethernet cable.
- Operating System Compatibility: The J6057-60002 HP Jetdirect 615N Internal Print Server Card is compatible with a wide range of operating systems, including Windows (XP, Vista, 7, 8, 8.1, 10), Mac OS (9.x, OS X), Linux (Red Hat, SuSE, Debian), Unix (HP-UX, SunOS, Solaris), and Novell NetWare.
- System Requirements: To use the J6057-60002 HP Jetdirect 615N Internal Print Server Card, the printer must have an EIO slot. The card requires a compatible operating system, a network connection, and a web browser to configure the card settings.
- Additional Features: The J6057-60002 HP Jetdirect 615N Internal Print Server Card has a range of additional features, including SNMP support for remote management, automatic configuration using DHCP or BootP, and support for multiple network operating systems.
Detail Description
- Manufacturer: HP
- Manufacturer Part Number: J6057-60002
- Type: Networking
- Sub-Type: Print Server Internal
- Device Type : Print Server
- Form Factor : Plug-In Module
- Interface (Bus) Type : Eio
Networking
- Connectivity Technology : Wired
- Cabling Type : Ethernet 10base-T, Ethernet 100base-Tx
- Data Link Protocol : Ethernet, Fast Ethernet
- Data Transfer Rate : 100 MBPS
- Network / Transport Protocol : Tcp/Ip, Ipx/Spx, Appletalk, Dlc/Llc
- Remote Management Protocol : Snmp 1, Snmp 2, Telnet
- Status Indicators : Port Transmission Speed
- Features : Full Duplex Capability, Dhcp Support, Auto-Negotiation, Bootp Support, Rarp Support
- Compliant Standards : IEEE 802.3, IEEE 802.3u
Expansion / Connectivity
- Compatible Slots : 1 X Eio
- Connections : 1 X Network – Ethernet 10base-T/100base-Tx – Rj-45
