Description
Requirements for Installation
The JH213-61001 HP Flexnetwork 7500 48-Port 1000Base-T with PoE+ SE Module is a modular switch that is designed for use with HP Flexnetwork 7500 series switches. The following are the requirements for installation:
- Switch Compatibility: The module must be installed in an HP Flexnetwork 7500 series switch to work properly.
- Power Requirements: The module requires a minimum of 250W power supply to operate.
- Environmental Requirements: The module must be installed in a controlled environment with a temperature range of 0 to 40°C and a relative humidity range of 5% to 95% non-condensing.
- Physical Requirements: The module must be installed in an HP Flexnetwork 7500 series switch chassis. The module dimensions are 19″ x 1.75″ x 14.4″.
- Network Connectivity: The module provides 48 Gigabit Ethernet ports for network connectivity. The ports support 1000Base-T with PoE+ SE capabilities.
- Technical Skills: The installation of the module requires technical skills and experience. It is recommended to hire a professional technician to install the module.
- Software and Firmware: The module must be running the latest software and firmware version to work properly. It is important to check for updates and upgrades before installation.
- Network Configuration: The module must be configured properly to work with the network. The network administrator must configure the switch ports, VLANs, and other network settings.
Configuration Guidelines
The JH213-61001 HP Flexnetwork 7500 48-Port 1000Base-T With Poe+ Se Module is a switch module designed for use with the HP Flexnetwork 7500 Switch. The module provides 48 ports for 10/100/1000Base-T Ethernet connections with Power over Ethernet Plus (PoE+) support.
When configuring the module, there are a few guidelines to follow to ensure proper operation and maximum performance.
- Ensure the module is installed correctly and securely in the switch.
- Configure the ports on the module for the correct speed, duplex, and VLAN settings to match the network requirements.
- Enable PoE+ on the ports that will be used to power devices, and configure the maximum power budget and priority levels if necessary.
- Set up link aggregation to increase bandwidth and ensure redundancy.
- Enable port security features such as MAC address limiting, port lockout, and traffic filtering to prevent unauthorized access to the network.
- Set up Quality of Service (QoS) to prioritize critical network traffic and prevent congestion.
- Regularly monitor and manage the module using network management tools such as HP Network Manager or Simple Network Management Protocol (SNMP) to ensure optimal performance and security.
By following these guidelines, the JH213-61001 module can be configured for reliable and efficient operation within the HP Flexnetwork 7500 Switch.
Environmental Certifications
JH213-61001 HP Flexnetwork 7500 48-Port 1000Base-T With Poe+ Se Module Environmental Certifications refers to the certifications and standards that the module has been tested and certified to meet in terms of environmental safety and performance. These certifications ensure that the module operates within acceptable environmental conditions, such as temperature, humidity, and electro-magnetic interference, and also ensures that it has been designed and manufactured with materials and processes that minimize environmental impact. Some of the certifications that the JH213-61001 HP Flexnetwork 7500 48-Port 1000Base-T With Poe+ Se Module may have received include RoHS (Restriction of Hazardous Substances) compliance, Energy Star, and WEEE (Waste Electrical and Electronic Equipment) compliance.
Main Specification about the HPE JH213-61001
- Manufacturer: HPE
- Part Number or SKU # JH213-61001
- Device Type: Managed Switch
Networking
- Ports : 1000Base-T (Poe+) X 48
- Connectivity Technology : Wired
- Cabling Type : Ethernet 1000Base-T
- Data Link Protocol : Gige
- Data Transfer Rate : 1 GBPS
- Features : Poe+
Expansion / Connectivity
- Interfaces : 48 X 1000Base-T (Poe+)
