Description
Compatibility of the HPE 128GB 2666Mhz PC4-21300 Ecc Reg DDR4 SDRAM 288-Pin Ram with Different Server Models
The HPE 128GB 2666Mhz PC4-21300 Ecc Reg DDR4 SDRAM 288-Pin Ram is designed to be compatible with a wide range of HPE servers. It is an original HPE memory module and is designed to work seamlessly with HPE servers, ensuring maximum performance and reliability. Some examples of compatible server models include:
- HPE ProLiant DL360 Gen10 Server
- HPE ProLiant DL380 Gen10 Server
- HPE ProLiant DL388 Gen10 Server
- HPE ProLiant DL580 Gen10 Server
- HPE ProLiant DL585 Gen10 Server
- HPE ProLiant DL60 Gen10 Server
- HPE ProLiant DL80 Gen10 Server
- HPE ProLiant ML350 Gen10 Server
- HPE ProLiant ML30 Gen10 Server
- HPE ProLiant XL230k Gen10 Server
It’s worth noting that it is important to check the server’s documentation or HPE’s website to confirm the compatibility with the specific server model and its configuration before installing the memory module. The memory module may be compatible with other server models and brands, but it is best to check with the server’s documentation or the manufacturer’s website to confirm compatibility.
Keep in mind that the specific server model and its configuration will determine how many memory modules can be installed and how they should be installed. It is also important to check the maximum memory capacity and the supported memory speed of the server.
How to Install the HPE 128GB 2666Mhz PC4-21300 Ecc Reg DDR4 SDRAM
288-Pin Ram
Installing the HPE 128GB 2666Mhz PC4-21300 Ecc Reg DDR4 SDRAM 288-Pin Ram into a server can be a relatively simple process, but it is important to follow the proper procedure to ensure proper installation and to avoid damaging the memory module or the server. Here are the general steps to install the memory module:
- Power off the server and unplug it from the power source.
- Remove the server’s cover, following the instructions in the server’s documentation.
- Locate the memory slots on the server’s motherboard.
- Open the latches on the memory slot, ensuring that they are fully open and not blocking the memory module.
- Carefully align the notches on the memory module with the notches on the memory slot.
- Gently insert the memory module into the slot, making sure that it is fully seated in the slot.
- Close the latches on the memory slot, making sure that they are securely in place.
- Replace the server’s cover, making sure that it is securely in place.
- Plug the server back in and power it on.
- Check the server’s BIOS or system management software to confirm that the memory has been recognized and that the correct amount of memory is being displayed.
It is important to note that the specific server model and its configuration will determine how many memory modules can be installed and how they should be installed. It is also important to check the maximum memory capacity and the supported memory speed of the server before installing the memory module.
It is also important to handle the memory module with care to avoid any physical damage. Also, make sure to ground yourself to avoid any static discharge to the memory module or other components.
It is always best to consult the server’s documentation or the manufacturer’s website for specific instructions on how to install memory in your server, as the process may vary depending on the server model.
Technical
Specifications of the HPE 128GB 2666Mhz PC4-21300 Ecc Reg DDR4 SDRAM 288-Pin
Ram
The HPE 128GB 2666Mhz PC4-21300 Ecc Reg DDR4 SDRAM 288-Pin Ram is a high-performance memory module with the following technical specifications:
- Memory Type: DDR4 SDRAM
- Capacity: 128 GB
- Memory Speed: 2666 MHz
- Data Integrity Check: ECC
- Error Correction: Registered (Reg)
- Pins: 288-Pin
- Form Factor: DIMM
- Voltage: 1.2V
- CAS Latency: 19
- Operating Temperature: 0°C to 85°C
- Storage Temperature: -40°C to 85°C
- Operating Humidity: 10% to 90% non-condensing
- Storage Humidity: 5% to 95% non-condensing
- RoHS compliant
- Lifetime Warranty
It is important to note that the HPE 128GB 2666Mhz PC4-21300 Ecc Reg DDR4 SDRAM 288-Pin Ram is designed for use in HPE servers, and may not be compatible with other brands or types of servers. It is important to check the server’s documentation or the manufacturer’s website for compatibility before installing the memory module.This memory module is designed to work at 2666Mhz, which is faster than the standard DDR4 memory, it also supports Error Correction Code (ECC) which helps in detecting and correcting errors in data which is important for servers and workstations. The 288-pin form factor is the standard for DDR4 memory and is compatible with most motherboards that support DDR4 memory.It is important to ensure that your server is capable of supporting the memory speed and voltage of the HPE 128GB 2666Mhz PC4-21300 Ecc Reg DDR4 SDRAM 288-Pin Ram before purchasing.
General Information of this HPE 840760-091
- Brand Name: HPE
- Model Number or SKU# 840760-091
- Type: Memory (RAM)
- RAM Type: PC4-21300
- Product Name: 128GB DDR4 SDRAM Memory Kit
Technical Information about 128GB DDR4 Ram
- Storage Capacity: 128GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 1 X 128GB
- Bus Speed: 2666mhz DDR4-21300/PC4-2666
- Data Integrity Check: ECC
- Signal Processing: Registered
- Cas Latency Timings: Cl19
- Rank Features: 8rx4
Physical Characteristics of HPE Memory
- Dimensions (W X D X H) : 8.89 X 19.81 X 1.91 Cm (3.5 X 7.8 X 0.75 In)
- Weight: 0.45 Kg (1 Lb)
Compatibility for 128GB DDR4 Ram
- HPE Convergedsystem 500, Proliant Bl460c Gen10, Dl360 Gen10, Dl380 Gen10, Dl560 Gen10, Ml350 Gen10, Xl230k Gen10, Synergy 480 Gen10, 660 Gen10
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.







