Description
High Performance
The Solidigm SSDPF2KE128T1N1 12.8TB PCI-E 4.0 X4 3D4 TLC SSD is designed to deliver high performance with its use of the PCI-Express 4.0 interface and x4 lane configuration. This means that it can transfer data at faster speeds compared to earlier versions of the PCI-E interface.
The use of 3D NAND technology and TLC flash memory allows for high storage capacity, reaching 12.8TB, and relatively low cost. However, TLC flash memory is known to have slightly lower performance and durability compared to other types of flash memory.
The SSD’s sequential read and write speeds are rated at up to 7,000MB/s and 6,300MB/s respectively, which means it can quickly transfer large files such as videos and high-resolution images. Its random read and write speeds are rated at up to 750,000 IOPS and 700,000 IOPS respectively, which means it can quickly access and retrieve data from any location on the drive.
The drive is built with advanced technologies such as data protection and error correction, which allows for high reliability and longevity. The drive also supports power-loss protection, which ensures that the data on the drive is not lost in case of a power failure.
Compatibility and Reliability
The Solidigm SSDPF2KE128T1N1 is a 12.8 terabyte (TB) solid-state drive (SSD) that is compatible with systems that have a PCI-Express (PCI-E) 4.0 interface and a x4 lane configuration. This means that the SSD can be installed and used in systems that have the latest version of the PCI-E interface and have four data lanes available for data transfer.
The SSD also requires a motherboard that can support the M.2 form factor and the NVMe protocol. These are the latest standards for SSDs, which allow for faster data transfer speeds and more efficient use of the PCI-E interface.
Form factor
The Solidigm SSDPF2KE128T1N1 is a 12.8 terabyte (TB) solid-state drive (SSD) that uses the PCI-Express (PCI-E) 4.0 interface and has a x4 lane configuration. This means that it uses the latest version of the PCI-E interface and has four data lanes available for data transfer.
The SSD uses 3D NAND technology, which is a type of flash memory that is stacked in layers to increase storage capacity. The “3D4” in the product name refers to the number of layers used in the memory (3) and the number of bits per cell (4) stored on each layer.
The SSD also uses TLC (triple-level cell) flash memory, which means that each cell can store three bits of data. TLC memory is typically less expensive than other types of flash memory, such as MLC (multi-level cell) or SLC (single-level cell), but it may also have slightly lower performance and durability.
The form factor of the SSD is a standard 2.5-inch drive, which is commonly used in laptops and other portable devices. This form factor allows for easy installation and replacement in a wide range of devices.
General Information about this Solidigm SSDPF2KE128T1N1
- Manufacturer: Solidigm
- Model Number or SKU# SSDPF2KE128T1N1
- Product Type: Solid State Drive
- Storage Capacity: 12.8TB
Technical Information of 12.8TB Solid State Drive
- Form Factor: U.2 15mm
- Interface Type: PCI-E 4.0 X4, NVMe
- Lithography: 144l TLC 3d NAND
- Shock: 1000 G/0.5 Msec
- MTBF: 2000000 Hours
Performance for PCI-E SSD
- Sequential Bandwidth – 100% Read (up To): 7100 MBPS
- Sequential Bandwidth – 100% Write (up To): 3700 MBPS
- Random Read (100% Span): 1000000 IOPS (4k Blocks)
- Random Write (100% Span): 374000 IOPS (4k Blocks)
Dimensions & Weight
- Height: 0.6 inch
- Width: 2.7 inch
- Depth: 3.9 inch
- Weight: 0.35 lbs
Advanced Technologies
- Enhanced Power Loss Data Protection: Yes
- Hardware Encryption: Aes 256 Bit
- Temperature Monitoring And Logging: Yes
- End-to-end Data Protection: Yes
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
