Description
Troubleshooting Common Issues
The 717708-001 HPE Ethernet 10GB Dual Port PCI Express 2.1 x8 561T Network Adapter may encounter common issues during its operation. Here are some troubleshooting steps that can help resolve these issues:
- Network connectivity issues: If the adapter is not connecting to the network, check that the cable is securely plugged in and that the correct driver is installed. Ensure that the switch port is configured correctly, and the adapter is receiving a valid IP address.
- Driver issues: Ensure that the correct driver for the adapter is installed and up-to-date. If there are any issues with the driver, try uninstalling and reinstalling the driver.
- Compatibility issues: Verify that the adapter is compatible with the server and the operating system. Check that the firmware on the adapter is up-to-date.
- Performance issues: If the adapter is not performing as expected, verify that the server meets the system requirements for the adapter. Check that the adapter is using the correct settings for link speed, duplex, and flow control.
- Power issues: Ensure that the server has adequate power supply to support the adapter’s additional power requirements.
- Firmware issues: Check for any firmware updates for the adapter and install them if necessary.
- IRQ conflicts: Verify that the adapter is not sharing an IRQ with another device in the server. If it is, try moving the adapter to a different slot.
- System crashes: If the server is crashing or experiencing other issues, check the event logs for any errors related to the adapter.
If these steps do not resolve the issue, consult the manufacturer’s documentation or support team for further assistance.
Network Management
The 717708-001 HPE Ethernet 10GB Dual Port PCI Express 2.1 x8 561T Network Adapter includes a range of network management features to help administrators monitor and manage network performance and security. Some of these features include:
- SNMP: The adapter supports Simple Network Management Protocol (SNMP), which enables remote monitoring and management of network devices.
- Link Aggregation Control Protocol (LACP): The adapter supports LACP, which allows multiple physical connections to be combined into a single logical link for improved redundancy and load balancing.
- VLAN support: The adapter supports VLAN tagging, which allows network traffic to be segregated into different virtual LANs for improved security and network performance.
- Quality of Service (QoS): The adapter supports QoS, which enables administrators to prioritize network traffic based on specific applications or services.
- Receive Side Scaling (RSS): The adapter supports RSS, which allows incoming network traffic to be distributed across multiple processor cores for improved network performance and reduced CPU utilization.
- Intel Ethernet Flow Director: The adapter supports Intel Ethernet Flow Director, which allows administrators to configure traffic redirection based on packet content, improving network performance and reducing CPU utilization.
- Network boot: The adapter supports network boot, which enables systems to boot from a network image, reducing the need for local storage and simplifying server management.
These network management features can be accessed and configured using the adapter’s driver software or through the server’s operating system. Overall, the 717708-001 HPE Ethernet 10GB Dual Port PCI Express 2.1 x8 561T Network Adapter provides a range of powerful tools for network administrators to manage and optimize network performance and security.
Similar Network Adapters
There are several similar network adapters to the 717708-001 HPE Ethernet 10GB Dual Port PCI Express 2.1 x8 561T Network Adapter available on the market. Here are a few examples:
- Intel X540-T2 Ethernet Converged Network Adapter: This adapter also features dual 10 Gigabit Ethernet ports and supports a variety of networking protocols, including iSCSI, FCoE, and TCP/IP. It supports jumbo frames, VLAN tagging, and QoS, and features a low profile and full-height bracket for flexible installation.
- Broadcom 57810S Dual-Port 10GbE SFP+ Converged Network Adapter: This adapter also features dual 10 Gigabit Ethernet ports and supports a range of networking protocols and features, including iSCSI, TCP/IP, jumbo frames, and VLAN tagging. It also supports SR-IOV and features a low profile and full-height bracket for flexible installation.
- Mellanox ConnectX-4 Lx Dual Port 25GbE DA/SFP Low Profile Gigabit Ethernet Network Interface Card: This adapter features dual 25 Gigabit Ethernet ports and supports a range of networking protocols, including TCP/IP, UDP/IP, iSCSI, NFS, and FCoE. It supports jumbo frames, VLAN tagging, and QoS, and features low power consumption and a low profile design.
- QLogic QLE8442 10GbE Converged Network Adapter: This adapter features dual 10 Gigabit Ethernet ports and supports a range of networking protocols, including iSCSI, FCoE, and TCP/IP. It supports jumbo frames, VLAN tagging, and QoS, and features a low profile and full-height bracket for flexible installation.
These network adapters are all designed for high-speed and reliable network connectivity for servers and workstations. They offer similar features and performance capabilities as the 717708-001 HPE Ethernet 10GB Dual Port PCI Express 2.1 x8 561T Network Adapter and may be suitable for similar enterprise and data center applications. However, it is important to check for compatibility with the server and operating system requirements before selecting a network adapter.
Specifications
- Manufacturer: HPE
- MPN: 717708-001
- Option Part Number: 716591-B21
- Adapter Type: Network Adapter
- Form Factor: Plug-in Card
- Interface (Bus) Type: PCI Express 2.1 x8
Networking
- Compliant Standards: IEEE 802.3, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1AX, IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.1Qau
- Connectivity Technology: Wired
- Data Link Protocol: 10 GigE
- Data Transfer Rate: 10 Gbps
- Features: Jumbo Frames support, teaming support, PXE support, Large Send Offload (LSO), Receive Side Scaling (RSS), TCP Segmentation Offload (TSO)
- Ports: 10Gb Ethernet x 2
- Remote Management Protocol: SNMP
- Status Indicators: Port status, link/activity
Processor / Memory
- Processor: 1 x x540 – Intel
Expansion / Connectivity
- Interfaces: 2 x 10Gb Ethernet – RJ-45
Software / System Requirements:
- SunSoft Solaris 10, Microsoft Windows Server 2008 Foundation, SuSE Linux Enterprise Server 11, SuSE Linux Enterprise Server 10, Red Hat Enterprise Linux 5, Microsoft Windows Server 2008 Enterprise, Microsoft Windows Server 2008 Standard, Microsoft Windows Web Server 2008, Microsoft Windows Server 2008 Datacenter, Red Hat Enterprise Linux 6, Microsoft Windows Small Business Server 2011 Standard, Microsoft Windows Small Business Server 2011 Essentials, Microsoft Windows MultiPoint Server 2011, Citrix XenServer 6.0, Microsoft Windows Server 2012, SunSoft Solaris 11, Citrix XenServer 6.1, VMware vSphere 5.0, VMware vSphere 4.1
Miscellaneous
- Compliant Standards: UL, BSMI, BSMI CNS 13438 Class A, EN 61000-3-2, ICES-003, EN 61000-3-3, EN55024, EN55022 Class A, WEEE, FCC Part 15 A, VCCI V-3 Class A ITE
Environmental Parameters
- Humidity Range Operating: 5 – 95% (non-condensing)
- Max Operating Temperature: 55 °C
- Min Operating Temperature: 0 °C
Product Dimensions & Weight
- Width: 9.50 inch
- Height: 2.25 inch
- Depth: 7.50 inch
- Weight: 1.00 lbs
Compatibility Information
- HPE Apollo pc40, sx40
- HPE ProLiant DL Series DL160 Gen8, DL160 Gen8 Base, DL160 Gen8 Entry, DL160 Gen8 Performance, DL180 Gen9, DL180 Gen9 Base, DL180 Gen9 Entry, DL180 Gen9 Storage, DL20 Gen9, DL20 Gen9 Entry, DL20 Gen9 Performance, DL360p Gen8, DL360p Gen8 Base, DL360p Gen8 CMS, DL360p Gen8 High Performance, DL360p Gen8 Performance, DL360p Gen8 Special Server, DL380 Gen9 High Performance, DL380p Gen8 Base, DL380p Gen8 High Performance, DL380p Gen8 Performance, DL380p Gen8 Special, DL385p Gen8, DL385p Gen8 Dedicated Workload, DL385p Gen8 Entry, DL385p Gen8 Maximized Consolidation, DL385p Gen8 Storage, DL385p Gen8 Storage Centric, DL560 Gen8, DL560 Gen8 Base, DL560 Gen8 Entry, DL560 Gen8 Performance, DL560 Gen9, DL560 Gen9 Base, DL560 Gen9 Entry, DL560 Gen9 Performance, DL80 Gen9 Entry
- HPE ProLiant ML Series ML110 Gen9, ML110 Gen9 Base, ML110 Gen9 Entry, ML30 Gen9, ML30 Gen9 Base, ML30 Gen9 Performance, ML350 Gen9, ML350 Gen9 Base, ML350 Gen9 Entry, ML350 Gen9 Performance, ML350e Gen8, ML350e Gen8 Base, ML350e Gen8 Entry, ML350e Gen8 Performance, ML350e Gen8 v2, ML350p Gen8, ML350p Gen8 Base, ML350p Gen8 Special Server
- HPE ProLiant SL Series SL230s Gen8 1U Left Half Width Tray, SL230s Gen8 1U Right Half Width Tray, SL230s Gen8 Base 1U Left Tray Server, SL230s Gen8 Base 1U Right Tray Server, SL250s Gen8 2U Left Half Width Tray, SL250s Gen8 2U PCIe Gen3 Left Tray, SL250s Gen8 2U PCIe Gen3 Right Tray, SL250s Gen8 2U Right Half Width Tray, SL250s Gen8 Base 2U Left Half Width Tray, SL250s Gen8 Base 2U Left Tray Server, SL250s Gen8 Base 2U Right Half Width Tray, SL250s Gen8 Base 2U Right Tray Server, SL270s Gen8 1U Left Half Width Tray, SL270s Gen8 1U Right Half Width Tray, SL270s Gen8 Base 4U Left Half Width Tray, SL270s Gen8 Base 4U Right Half Width Tray, SL270s Gen8 SE 4U Left Tray, SL270s Gen8 SE 4U Right Tray, SL4540 Gen8, SL4540 Gen8 Tray 2x Node Server, SL4545 G7
- HPE ProLiant XL Series XL170r Gen9, XL190r Gen9
- HPE SimpliVity 380 Gen9 Node
- HPE StoreEasy 3850 Gateway Single Node
