Power Consumption and Operating Temperature
The power consumption and operating temperature of the QK724A model will depend on the specific configuration of the server and the workloads it is running.
Power Consumption: The QK724A model has a maximum power consumption of 850 watts. Power consumption will vary depending on the specific configuration of the server, including the number of processors, memory, and storage. The HPE Power Discovery Services can be used to monitor and optimize power consumption.
Operating Temperature: The QK724A model has an operating temperature range of 10°C to 35°C (50°F to 95°F) at sea level. It should be operated in a temperature-controlled environment to ensure optimal performance and to avoid damage to the hardware. The server should not be exposed to temperatures outside of this range.
It's important to note that the power consumption and operating temperature of the QK724A model may change depending on the specific configuration and workloads, so it's important to consult the HPE documentation for the most up-to-date information.
SFP+ Transceiver Module vs. Other Transceiver Types
SFP+ (Small Form-Factor Pluggable Plus) transceiver modules are a type of transceiver that are used for high-speed data transfer in networking applications. They are similar to SFP (Small Form-Factor Pluggable) transceiver modules but offer higher data transfer rates and distances.
Here are some of the main differences between SFP+ transceiver modules and other types of transceiver modules:
SFP vs SFP+: SFP transceiver modules are designed for data transfer rates of up to 1 Gb/s, while SFP+ transceiver modules are designed for data transfer rates of up to 10 Gb/s.
XFP vs SFP+: XFP (10 Gigabit Small Form-Factor Pluggable) transceiver modules are also designed for data transfer rates of up to 10 Gb/s, but they are larger in size and more expensive than SFP+ transceiver modules.
SFP28 vs SFP+: SFP28 (25 Gigabit Small Form-Factor Pluggable) transceiver modules are designed for data transfer rates of up to 25 Gb/s, while SFP+ transceiver modules are designed for data transfer rates of up to 10 Gb/s.
QSFP+ vs SFP+: QSFP+ (Quad Small Form-Factor Pluggable Plus) transceiver modules are designed for data transfer rates of up to 40 Gb/s, while SFP+ transceiver modules are designed for data transfer rates of up to 10 Gb/s.
CFP vs SFP+: CFP (C form-factor Pluggable) transceiver modules are designed for data transfer rates of up to 100 Gb/s, while SFP+ transceiver modules are designed for data transfer rates of up to 10 Gb/s.
Management and Monitoring Capabilities
The QK724A model has several management and monitoring capabilities that allow for easy deployment and maintenance of the server. These include:
HPE OneView: This is a software platform that allows for easy deployment, management, and monitoring of the QK724A model. It provides a single, centralized interface for managing the server and its components, including processors, memory, storage, and networking.
HPE iLO Advanced: This is a remote management interface that allows for remote monitoring and control of the QK724A model. It provides features such as remote console access, power management, and event logging.
HPE Active Health System: This is a built-in diagnostic tool that allows for real-time monitoring of the QK724A model's hardware and software components. It provides detailed information on the server's status, including error messages and system logs.
HPE Smart Array controllers: These controllers provide advanced data protection and monitoring capabilities, including RAID, data encryption, and drive health monitoring.
HPE SmartMemory: This feature provides real-time monitoring of the server's memory, including temperature and voltage levels, to ensure optimal performance and prevent data loss.
HPE Power Discovery Services: This feature allows for efficient power management and optimization, reducing energy costs.
HPE Insight Remote Support: This service allows for remote monitoring and management of the server, including automatic problem detection and resolution.
HPE Insight Online: This is a cloud-based service that allows for remote monitoring and management of the server from anywhere, including automatic problem detection and resolution, and access to technical support.
Firmware and Software Support
The QK724A model is supported by a variety of firmware and software, which includes:
HPE ProLiant DL580 Gen9 Server Firmware: This firmware is specific to the QK724A model and provides support for the server's hardware and components, including processors, memory, storage, and networking.
HPE ProLiant DL580 Gen9 Server Software: This software is specific to the QK724A model and provides support for the server's management and monitoring capabilities, including HPE OneView, HPE iLO Advanced, and HPE Active Health System.
HPE Smart Array controllers: This software provides support for the server's advanced data protection and monitoring capabilities, including RAID, data encryption, and drive health monitoring.
HPE SmartMemory: This software provides support for the server's memory monitoring capabilities, including temperature and voltage levels, to ensure optimal performance and prevent data loss.
HPE Power Discovery Services: This software provides support for the server's power management and optimization capabilities.
HPE Insight Remote Support: This service provides support for remote monitoring and management of the server, including automatic problem detection and resolution.
HPE Insight Online: This is a cloud-based service that provides support for remote monitoring and management of the server from anywhere, including automatic problem detection and resolution, and access to technical support.
Operating System Support: The QK724A model is compatible with a wide range of operating systems, including Windows, Linux, and VMware, providing flexibility for different workloads and applications.
- Manufacturer: HP
- MPN: QK724A
- Spare Part Number: 656435-001
- SKU: QK724A
- Transceiver Type: SFP+ transceiver module
- Form Factor: Plug-in Module
- Connectivity Technology: Wired
- Cabling Type: Fibre Channel
- Data Link Protocol: 16Gb Fibre Channel (SW)
- Data Transfer Rate: 14.025 Gbps
Expansion / Connectivity
- Interfaces: 1 x 16Gb Fibre Channel (SW) - LC
- Compatible Slots: 1 x SFP+
- Brocade 16Gb/12 SAN Switch Module for HPE Synergy, 16Gb/16 SAN Switch for HP BladeSystem c-Class, 16Gb/24 Fibre Channel SAN Switch Module for HP Synergy, 16Gb/24 SAN Switch Module Power Pack+ for HPE Synergy, 16Gb/28 SAN Switch for HP BladeSystem c-Class, 16Gb/28 SAN Switch Power Pack+ for BladeSystem c-Class HPE 32-port 16Gb/s Director Blade, 48-port 16Gb/s Director Blade, SAN Director 64-port 8Gb Fibre Channel Blade, SN3000B 16Gb 24-port/12-port Active Fibre Channel Switch, SN3000B 16Gb 24-port/24-port Active Fibre Channel Switch, SN6000B, SN6000B 16Gb 48-port/24-port Active Fibre Channel Switch
- SN6000B 16Gb 48-port/24-port Active Power Pack+ Fibre Channel Switch, SN6000B 16Gb 48-port/48-port Active Power Pack+ Fibre Channel Switch, SN8000B 32-port 8Gb/s Director Blade, SN8000B 48-port 8Gb/s Director Blade HPE StoreFabric SN3600B, SN3600B Power Pack+, SN4000B Power Pack+ SAN Extension Switch, SN6500B 16Gb 96-port/48-port Active Fibre Channel Switch, SN6500B 16Gb 96-port/48-port Active Power Pack+ Fibre Channel Switch, SN6500B Power Pack+, SN6600B 32Gb 48/24, SN6600B 32Gb 48/24 Power Pack+, SN6600B 32Gb 48/48, SN6600B 32Gb 48/48 Power Pack+ Fibre Channel Switch, SN6650B, SN6650B Power PAck, SN8000B 4-Slot Power Pack+ SAN Director Switch, SN8000B 8-Slot Power Pack+ SAN Backbone Director Switch, SN8600B 4-slot Power Pack+ Director Switch
Building a fiber-optic network calls for a lot of planning and consideration of many factors. Transceivers are part of the many devices used to build optical fiber systems. A transceiver serves the combined roles of a transmitter and a receiver in that it transmits and receives signals. They are most common in communication equipment such as cellular phones, cordless telephone sets, and radio. Small form factors are required as networks become dense and space is limited, which sees transceivers included in chipsets.
In local area networks (LAN), a transceiver is used to connect a computer to printers and other devices on the network. Usually, the transceiver is integrated into the Network Interface Card (NIC)
Typical Roles of a Transceiver
- Used to convert frequencies from IF to RF.
- Widespread use in wireless communication to transmit data – voice, data, and video.
- RF transceivers are used in communication devices to support radio and TV signal transmission, digital signals transmission, and satellite communication.
- Collision detection – detection of simultaneous signals on the network.
- Transceivers can be deployed to provide a jabber function to interrupt transmission of long data stream outputs.
Look no further for all types of transceivers including fiber optic transceivers, wireless transceivers, Ethernet transceivers, and RF transceivers. All these transceivers have different characteristics and support full-duplex communication, but the principle behind their work remains the same. Different types of transceivers will have varying numbers of ports used in transceiver networking connections.
RF Transceivers: these devices are used to transmit video or voice data over a wireless medium. Commonly used for satellite communication, radio transmission, and ITE/WiMax/WLAN networks. The radio transceiver works by silencing the receiver when it is transmitting. There is an electronic switch that facilitates the connection of both the receiver and transmitter on the same antenna. The switch protects the receiver from damage that may be caused by the transmitter output.
Fiber Optic Transceivers: Also referred to as optical modules or fiber optical transceivers. Used to transmit data in fiber optic technology. The network must also have electronic components to encode or decode data into light signals.
Ethernet Transceivers: Basically used to connect electronic devices in a network so that they are able to transmit and receive data. It is also referred to as a media access unit (MAU). The best application of these transceivers is in the specification of IEEE 802.3 and Ethernet. Ethernet transceivers will detect a collision, provide Ethernet interface processing, convert digital data, and provide access to the network.
Wireless Transceivers: Wireless transceivers are a fundamental component necessary for data delivery in wireless networks. These transceivers have two layers. The physical layer has a baseband processor and RF front end. The processor converts a bitstream to a collection symbol flow for data transmission. The second layer is a MAC layer for link traffic control in contacting wireless links, improving data throughput, and preventing collisions.
We guarantee our customers high quality and reliability for all our transceiver networking solutions, irrespective of the type and size of your network.
Here, you can check more available conditions of your desired product QK724A at a competitive price. We are trying our best to meet your needs on the enterprise-level computer, server, data centre, and networking hardware. You are welcome to ask our live chat or get live representative support over the phone.
Other Available Conditions for this Part
Other Available Categories For - Networking - Transceiver
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.